robotux
/
rt_gccstream
1
0
Fork 0
Code Issues Pull Requests Releases Activity
rt_gccstream/gcc/tree-vect-loop-manip.c

2572 lines
84 KiB
C
Raw Permalink Blame History

/* Vectorizer Specific Loop Manipulations
Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
Contributed by Dorit Naishlos <dorit@il.ibm.com>
and Ira Rosen <irar@il.ibm.com>
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "ggc.h"
#include "tree.h"
#include "basic-block.h"
#include "diagnostic.h"
#include "tree-flow.h"
#include "tree-dump.h"
#include "cfgloop.h"
#include "cfglayout.h"
#include "expr.h"
#include "toplev.h"
#include "tree-scalar-evolution.h"
#include "tree-vectorizer.h"
#include "langhooks.h"
/*************************************************************************
Simple Loop Peeling Utilities
Utilities to support loop peeling for vectorization purposes.
*************************************************************************/
/* Renames the use *OP_P. */
static void
rename_use_op (use_operand_p op_p)
{
tree new_name;
if (TREE_CODE (USE_FROM_PTR (op_p)) != SSA_NAME)
return;
new_name = get_current_def (USE_FROM_PTR (op_p));
/* Something defined outside of the loop. */
if (!new_name)
return;
/* An ordinary ssa name defined in the loop. */
SET_USE (op_p, new_name);
}
/* Renames the variables in basic block BB. */
void
rename_variables_in_bb (basic_block bb)
{
gimple_stmt_iterator gsi;
gimple stmt;
use_operand_p use_p;
ssa_op_iter iter;
edge e;
edge_iterator ei;
struct loop *loop = bb->loop_father;
for (gsi = gsi_start_bb (bb); !gsi_end_p (gsi); gsi_next (&gsi))
{
stmt = gsi_stmt (gsi);
FOR_EACH_SSA_USE_OPERAND (use_p, stmt, iter, SSA_OP_ALL_USES)
rename_use_op (use_p);
}
FOR_EACH_EDGE (e, ei, bb->succs)
{
if (!flow_bb_inside_loop_p (loop, e->dest))
continue;
for (gsi = gsi_start_phis (e->dest); !gsi_end_p (gsi); gsi_next (&gsi))
rename_use_op (PHI_ARG_DEF_PTR_FROM_EDGE (gsi_stmt (gsi), e));
}
}
/* Renames variables in new generated LOOP. */
void
rename_variables_in_loop (struct loop *loop)
{
unsigned i;
basic_block *bbs;
bbs = get_loop_body (loop);
for (i = 0; i < loop->num_nodes; i++)
rename_variables_in_bb (bbs[i]);
free (bbs);
}
typedef struct
{
tree from, to;
basic_block bb;
} adjust_info;
DEF_VEC_O(adjust_info);
DEF_VEC_ALLOC_O_STACK(adjust_info);
#define VEC_adjust_info_stack_alloc(alloc) VEC_stack_alloc (adjust_info, alloc)
/* A stack of values to be adjusted in debug stmts. We have to
process them LIFO, so that the closest substitution applies. If we
processed them FIFO, without the stack, we might substitute uses
with a PHI DEF that would soon become non-dominant, and when we got
to the suitable one, it wouldn't have anything to substitute any
more. */
static VEC(adjust_info, stack) *adjust_vec;
/* Adjust any debug stmts that referenced AI->from values to use the
loop-closed AI->to, if the references are dominated by AI->bb and
not by the definition of AI->from. */
static void
adjust_debug_stmts_now (adjust_info *ai)
{
basic_block bbphi = ai->bb;
tree orig_def = ai->from;
tree new_def = ai->to;
imm_use_iterator imm_iter;
gimple stmt;
basic_block bbdef = gimple_bb (SSA_NAME_DEF_STMT (orig_def));
gcc_assert (dom_info_available_p (CDI_DOMINATORS));
/* Adjust any debug stmts that held onto non-loop-closed
references. */
FOR_EACH_IMM_USE_STMT (stmt, imm_iter, orig_def)
{
use_operand_p use_p;
basic_block bbuse;
if (!is_gimple_debug (stmt))
continue;
gcc_assert (gimple_debug_bind_p (stmt));
bbuse = gimple_bb (stmt);
if ((bbuse == bbphi
|| dominated_by_p (CDI_DOMINATORS, bbuse, bbphi))
&& !(bbuse == bbdef
|| dominated_by_p (CDI_DOMINATORS, bbuse, bbdef)))
{
if (new_def)
FOR_EACH_IMM_USE_ON_STMT (use_p, imm_iter)
SET_USE (use_p, new_def);
else
{
gimple_debug_bind_reset_value (stmt);
update_stmt (stmt);
}
}
}
}
/* Adjust debug stmts as scheduled before. */
static void
adjust_vec_debug_stmts (void)
{
if (!MAY_HAVE_DEBUG_STMTS)
return;
gcc_assert (adjust_vec);
while (!VEC_empty (adjust_info, adjust_vec))
{
adjust_debug_stmts_now (VEC_last (adjust_info, adjust_vec));
VEC_pop (adjust_info, adjust_vec);
}
VEC_free (adjust_info, stack, adjust_vec);
}
/* Adjust any debug stmts that referenced FROM values to use the
loop-closed TO, if the references are dominated by BB and not by
the definition of FROM. If adjust_vec is non-NULL, adjustments
will be postponed until adjust_vec_debug_stmts is called. */
static void
adjust_debug_stmts (tree from, tree to, basic_block bb)
{
adjust_info ai;
if (MAY_HAVE_DEBUG_STMTS && TREE_CODE (from) == SSA_NAME
&& SSA_NAME_VAR (from) != gimple_vop (cfun))
{
ai.from = from;
ai.to = to;
ai.bb = bb;
if (adjust_vec)
VEC_safe_push (adjust_info, stack, adjust_vec, &ai);
else
adjust_debug_stmts_now (&ai);
}
}
/* Change E's phi arg in UPDATE_PHI to NEW_DEF, and record information
to adjust any debug stmts that referenced the old phi arg,
presumably non-loop-closed references left over from other
transformations. */
static void
adjust_phi_and_debug_stmts (gimple update_phi, edge e, tree new_def)
{
tree orig_def = PHI_ARG_DEF_FROM_EDGE (update_phi, e);
SET_PHI_ARG_DEF (update_phi, e->dest_idx, new_def);
if (MAY_HAVE_DEBUG_STMTS)
adjust_debug_stmts (orig_def, PHI_RESULT (update_phi),
gimple_bb (update_phi));
}
/* Update the PHI nodes of NEW_LOOP.
NEW_LOOP is a duplicate of ORIG_LOOP.
AFTER indicates whether NEW_LOOP executes before or after ORIG_LOOP:
AFTER is true if NEW_LOOP executes after ORIG_LOOP, and false if it
executes before it. */
static void
slpeel_update_phis_for_duplicate_loop (struct loop *orig_loop,
struct loop *new_loop, bool after)
{
tree new_ssa_name;
gimple phi_new, phi_orig;
tree def;
edge orig_loop_latch = loop_latch_edge (orig_loop);
edge orig_entry_e = loop_preheader_edge (orig_loop);
edge new_loop_exit_e = single_exit (new_loop);
edge new_loop_entry_e = loop_preheader_edge (new_loop);
edge entry_arg_e = (after ? orig_loop_latch : orig_entry_e);
gimple_stmt_iterator gsi_new, gsi_orig;
/*
step 1. For each loop-header-phi:
Add the first phi argument for the phi in NEW_LOOP
(the one associated with the entry of NEW_LOOP)
step 2. For each loop-header-phi:
Add the second phi argument for the phi in NEW_LOOP
(the one associated with the latch of NEW_LOOP)
step 3. Update the phis in the successor block of NEW_LOOP.
case 1: NEW_LOOP was placed before ORIG_LOOP:
The successor block of NEW_LOOP is the header of ORIG_LOOP.
Updating the phis in the successor block can therefore be done
along with the scanning of the loop header phis, because the
header blocks of ORIG_LOOP and NEW_LOOP have exactly the same
phi nodes, organized in the same order.
case 2: NEW_LOOP was placed after ORIG_LOOP:
The successor block of NEW_LOOP is the original exit block of
ORIG_LOOP - the phis to be updated are the loop-closed-ssa phis.
We postpone updating these phis to a later stage (when
loop guards are added).
*/
/* Scan the phis in the headers of the old and new loops
(they are organized in exactly the same order). */
for (gsi_new = gsi_start_phis (new_loop->header),
gsi_orig = gsi_start_phis (orig_loop->header);
!gsi_end_p (gsi_new) && !gsi_end_p (gsi_orig);
gsi_next (&gsi_new), gsi_next (&gsi_orig))
{
source_location locus;
phi_new = gsi_stmt (gsi_new);
phi_orig = gsi_stmt (gsi_orig);
/* step 1. */
def = PHI_ARG_DEF_FROM_EDGE (phi_orig, entry_arg_e);
locus = gimple_phi_arg_location_from_edge (phi_orig, entry_arg_e);
add_phi_arg (phi_new, def, new_loop_entry_e, locus);
/* step 2. */
def = PHI_ARG_DEF_FROM_EDGE (phi_orig, orig_loop_latch);
locus = gimple_phi_arg_location_from_edge (phi_orig, orig_loop_latch);
if (TREE_CODE (def) != SSA_NAME)
continue;
new_ssa_name = get_current_def (def);
if (!new_ssa_name)
{
/* This only happens if there are no definitions
inside the loop. use the phi_result in this case. */
new_ssa_name = PHI_RESULT (phi_new);
}
/* An ordinary ssa name defined in the loop. */
add_phi_arg (phi_new, new_ssa_name, loop_latch_edge (new_loop), locus);
/* Drop any debug references outside the loop, if they would
become ill-formed SSA. */
adjust_debug_stmts (def, NULL, single_exit (orig_loop)->dest);
/* step 3 (case 1). */
if (!after)
{
gcc_assert (new_loop_exit_e == orig_entry_e);
adjust_phi_and_debug_stmts (phi_orig, new_loop_exit_e, new_ssa_name);
}
}
}
/* Update PHI nodes for a guard of the LOOP.
Input:
- LOOP, GUARD_EDGE: LOOP is a loop for which we added guard code that
controls whether LOOP is to be executed. GUARD_EDGE is the edge that
originates from the guard-bb, skips LOOP and reaches the (unique) exit
bb of LOOP. This loop-exit-bb is an empty bb with one successor.
We denote this bb NEW_MERGE_BB because before the guard code was added
it had a single predecessor (the LOOP header), and now it became a merge
point of two paths - the path that ends with the LOOP exit-edge, and
the path that ends with GUARD_EDGE.
- NEW_EXIT_BB: New basic block that is added by this function between LOOP
and NEW_MERGE_BB. It is used to place loop-closed-ssa-form exit-phis.
===> The CFG before the guard-code was added:
LOOP_header_bb:
loop_body
if (exit_loop) goto update_bb
else goto LOOP_header_bb
update_bb:
==> The CFG after the guard-code was added:
guard_bb:
if (LOOP_guard_condition) goto new_merge_bb
else goto LOOP_header_bb
LOOP_header_bb:
loop_body
if (exit_loop_condition) goto new_merge_bb
else goto LOOP_header_bb
new_merge_bb:
goto update_bb
update_bb:
==> The CFG after this function:
guard_bb:
if (LOOP_guard_condition) goto new_merge_bb
else goto LOOP_header_bb
LOOP_header_bb:
loop_body
if (exit_loop_condition) goto new_exit_bb
else goto LOOP_header_bb
new_exit_bb:
new_merge_bb:
goto update_bb
update_bb:
This function:
1. creates and updates the relevant phi nodes to account for the new
incoming edge (GUARD_EDGE) into NEW_MERGE_BB. This involves:
1.1. Create phi nodes at NEW_MERGE_BB.
1.2. Update the phi nodes at the successor of NEW_MERGE_BB (denoted
UPDATE_BB). UPDATE_BB was the exit-bb of LOOP before NEW_MERGE_BB
2. preserves loop-closed-ssa-form by creating the required phi nodes
at the exit of LOOP (i.e, in NEW_EXIT_BB).
There are two flavors to this function:
slpeel_update_phi_nodes_for_guard1:
Here the guard controls whether we enter or skip LOOP, where LOOP is a
prolog_loop (loop1 below), and the new phis created in NEW_MERGE_BB are
for variables that have phis in the loop header.
slpeel_update_phi_nodes_for_guard2:
Here the guard controls whether we enter or skip LOOP, where LOOP is an
epilog_loop (loop2 below), and the new phis created in NEW_MERGE_BB are
for variables that have phis in the loop exit.
I.E., the overall structure is:
loop1_preheader_bb:
guard1 (goto loop1/merge1_bb)
loop1
loop1_exit_bb:
guard2 (goto merge1_bb/merge2_bb)
merge1_bb
loop2
loop2_exit_bb
merge2_bb
next_bb
slpeel_update_phi_nodes_for_guard1 takes care of creating phis in
loop1_exit_bb and merge1_bb. These are entry phis (phis for the vars
that have phis in loop1->header).
slpeel_update_phi_nodes_for_guard2 takes care of creating phis in
loop2_exit_bb and merge2_bb. These are exit phis (phis for the vars
that have phis in next_bb). It also adds some of these phis to
loop1_exit_bb.
slpeel_update_phi_nodes_for_guard1 is always called before
slpeel_update_phi_nodes_for_guard2. They are both needed in order
to create correct data-flow and loop-closed-ssa-form.
Generally slpeel_update_phi_nodes_for_guard1 creates phis for variables
that change between iterations of a loop (and therefore have a phi-node
at the loop entry), whereas slpeel_update_phi_nodes_for_guard2 creates
phis for variables that are used out of the loop (and therefore have
loop-closed exit phis). Some variables may be both updated between
iterations and used after the loop. This is why in loop1_exit_bb we
may need both entry_phis (created by slpeel_update_phi_nodes_for_guard1)
and exit phis (created by slpeel_update_phi_nodes_for_guard2).
- IS_NEW_LOOP: if IS_NEW_LOOP is true, then LOOP is a newly created copy of
an original loop. i.e., we have:
orig_loop
guard_bb (goto LOOP/new_merge)
new_loop <-- LOOP
new_exit
new_merge
next_bb
If IS_NEW_LOOP is false, then LOOP is an original loop, in which case we
have:
new_loop
guard_bb (goto LOOP/new_merge)
orig_loop <-- LOOP
new_exit
new_merge
next_bb
The SSA names defined in the original loop have a current
reaching definition that that records the corresponding new
ssa-name used in the new duplicated loop copy.
*/
/* Function slpeel_update_phi_nodes_for_guard1
Input:
- GUARD_EDGE, LOOP, IS_NEW_LOOP, NEW_EXIT_BB - as explained above.
- DEFS - a bitmap of ssa names to mark new names for which we recorded
information.
In the context of the overall structure, we have:
loop1_preheader_bb:
guard1 (goto loop1/merge1_bb)
LOOP-> loop1
loop1_exit_bb:
guard2 (goto merge1_bb/merge2_bb)
merge1_bb
loop2
loop2_exit_bb
merge2_bb
next_bb
For each name updated between loop iterations (i.e - for each name that has
an entry (loop-header) phi in LOOP) we create a new phi in:
1. merge1_bb (to account for the edge from guard1)
2. loop1_exit_bb (an exit-phi to keep LOOP in loop-closed form)
*/
static void
slpeel_update_phi_nodes_for_guard1 (edge guard_edge, struct loop *loop,
bool is_new_loop, basic_block *new_exit_bb,
bitmap *defs)
{
gimple orig_phi, new_phi;
gimple update_phi, update_phi2;
tree guard_arg, loop_arg;
basic_block new_merge_bb = guard_edge->dest;
edge e = EDGE_SUCC (new_merge_bb, 0);
basic_block update_bb = e->dest;
basic_block orig_bb = loop->header;
edge new_exit_e;
tree current_new_name;
gimple_stmt_iterator gsi_orig, gsi_update;
/* Create new bb between loop and new_merge_bb. */
*new_exit_bb = split_edge (single_exit (loop));
new_exit_e = EDGE_SUCC (*new_exit_bb, 0);
for (gsi_orig = gsi_start_phis (orig_bb),
gsi_update = gsi_start_phis (update_bb);
!gsi_end_p (gsi_orig) && !gsi_end_p (gsi_update);
gsi_next (&gsi_orig), gsi_next (&gsi_update))
{
source_location loop_locus, guard_locus;;
orig_phi = gsi_stmt (gsi_orig);
update_phi = gsi_stmt (gsi_update);
/** 1. Handle new-merge-point phis **/
/* 1.1. Generate new phi node in NEW_MERGE_BB: */
new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
new_merge_bb);
/* 1.2. NEW_MERGE_BB has two incoming edges: GUARD_EDGE and the exit-edge
of LOOP. Set the two phi args in NEW_PHI for these edges: */
loop_arg = PHI_ARG_DEF_FROM_EDGE (orig_phi, EDGE_SUCC (loop->latch, 0));
loop_locus = gimple_phi_arg_location_from_edge (orig_phi,
EDGE_SUCC (loop->latch,
0));
guard_arg = PHI_ARG_DEF_FROM_EDGE (orig_phi, loop_preheader_edge (loop));
guard_locus
= gimple_phi_arg_location_from_edge (orig_phi,
loop_preheader_edge (loop));
add_phi_arg (new_phi, loop_arg, new_exit_e, loop_locus);
add_phi_arg (new_phi, guard_arg, guard_edge, guard_locus);
/* 1.3. Update phi in successor block. */
gcc_assert (PHI_ARG_DEF_FROM_EDGE (update_phi, e) == loop_arg
|| PHI_ARG_DEF_FROM_EDGE (update_phi, e) == guard_arg);
adjust_phi_and_debug_stmts (update_phi, e, PHI_RESULT (new_phi));
update_phi2 = new_phi;
/** 2. Handle loop-closed-ssa-form phis **/
if (!is_gimple_reg (PHI_RESULT (orig_phi)))
continue;
/* 2.1. Generate new phi node in NEW_EXIT_BB: */
new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
*new_exit_bb);
/* 2.2. NEW_EXIT_BB has one incoming edge: the exit-edge of the loop. */
add_phi_arg (new_phi, loop_arg, single_exit (loop), loop_locus);
/* 2.3. Update phi in successor of NEW_EXIT_BB: */
gcc_assert (PHI_ARG_DEF_FROM_EDGE (update_phi2, new_exit_e) == loop_arg);
adjust_phi_and_debug_stmts (update_phi2, new_exit_e,
PHI_RESULT (new_phi));
/* 2.4. Record the newly created name with set_current_def.
We want to find a name such that
name = get_current_def (orig_loop_name)
and to set its current definition as follows:
set_current_def (name, new_phi_name)
If LOOP is a new loop then loop_arg is already the name we're
looking for. If LOOP is the original loop, then loop_arg is
the orig_loop_name and the relevant name is recorded in its
current reaching definition. */
if (is_new_loop)
current_new_name = loop_arg;
else
{
current_new_name = get_current_def (loop_arg);
/* current_def is not available only if the variable does not
change inside the loop, in which case we also don't care
about recording a current_def for it because we won't be
trying to create loop-exit-phis for it. */
if (!current_new_name)
continue;
}
gcc_assert (get_current_def (current_new_name) == NULL_TREE);
set_current_def (current_new_name, PHI_RESULT (new_phi));
bitmap_set_bit (*defs, SSA_NAME_VERSION (current_new_name));
}
}
/* Function slpeel_update_phi_nodes_for_guard2
Input:
- GUARD_EDGE, LOOP, IS_NEW_LOOP, NEW_EXIT_BB - as explained above.
In the context of the overall structure, we have:
loop1_preheader_bb:
guard1 (goto loop1/merge1_bb)
loop1
loop1_exit_bb:
guard2 (goto merge1_bb/merge2_bb)
merge1_bb
LOOP-> loop2
loop2_exit_bb
merge2_bb
next_bb
For each name used out side the loop (i.e - for each name that has an exit
phi in next_bb) we create a new phi in:
1. merge2_bb (to account for the edge from guard_bb)
2. loop2_exit_bb (an exit-phi to keep LOOP in loop-closed form)
3. guard2 bb (an exit phi to keep the preceding loop in loop-closed form),
if needed (if it wasn't handled by slpeel_update_phis_nodes_for_phi1).
*/
static void
slpeel_update_phi_nodes_for_guard2 (edge guard_edge, struct loop *loop,
bool is_new_loop, basic_block *new_exit_bb)
{
gimple orig_phi, new_phi;
gimple update_phi, update_phi2;
tree guard_arg, loop_arg;
basic_block new_merge_bb = guard_edge->dest;
edge e = EDGE_SUCC (new_merge_bb, 0);
basic_block update_bb = e->dest;
edge new_exit_e;
tree orig_def, orig_def_new_name;
tree new_name, new_name2;
tree arg;
gimple_stmt_iterator gsi;
/* Create new bb between loop and new_merge_bb. */
*new_exit_bb = split_edge (single_exit (loop));
new_exit_e = EDGE_SUCC (*new_exit_bb, 0);
for (gsi = gsi_start_phis (update_bb); !gsi_end_p (gsi); gsi_next (&gsi))
{
update_phi = gsi_stmt (gsi);
orig_phi = update_phi;
orig_def = PHI_ARG_DEF_FROM_EDGE (orig_phi, e);
/* This loop-closed-phi actually doesn't represent a use
out of the loop - the phi arg is a constant. */
if (TREE_CODE (orig_def) != SSA_NAME)
continue;
orig_def_new_name = get_current_def (orig_def);
arg = NULL_TREE;
/** 1. Handle new-merge-point phis **/
/* 1.1. Generate new phi node in NEW_MERGE_BB: */
new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
new_merge_bb);
/* 1.2. NEW_MERGE_BB has two incoming edges: GUARD_EDGE and the exit-edge
of LOOP. Set the two PHI args in NEW_PHI for these edges: */
new_name = orig_def;
new_name2 = NULL_TREE;
if (orig_def_new_name)
{
new_name = orig_def_new_name;
/* Some variables have both loop-entry-phis and loop-exit-phis.
Such variables were given yet newer names by phis placed in
guard_bb by slpeel_update_phi_nodes_for_guard1. I.e:
new_name2 = get_current_def (get_current_def (orig_name)). */
new_name2 = get_current_def (new_name);
}
if (is_new_loop)
{
guard_arg = orig_def;
loop_arg = new_name;
}
else
{
guard_arg = new_name;
loop_arg = orig_def;
}
if (new_name2)
guard_arg = new_name2;
add_phi_arg (new_phi, loop_arg, new_exit_e, UNKNOWN_LOCATION);
add_phi_arg (new_phi, guard_arg, guard_edge, UNKNOWN_LOCATION);
/* 1.3. Update phi in successor block. */
gcc_assert (PHI_ARG_DEF_FROM_EDGE (update_phi, e) == orig_def);
adjust_phi_and_debug_stmts (update_phi, e, PHI_RESULT (new_phi));
update_phi2 = new_phi;
/** 2. Handle loop-closed-ssa-form phis **/
/* 2.1. Generate new phi node in NEW_EXIT_BB: */
new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
*new_exit_bb);
/* 2.2. NEW_EXIT_BB has one incoming edge: the exit-edge of the loop. */
add_phi_arg (new_phi, loop_arg, single_exit (loop), UNKNOWN_LOCATION);
/* 2.3. Update phi in successor of NEW_EXIT_BB: */
gcc_assert (PHI_ARG_DEF_FROM_EDGE (update_phi2, new_exit_e) == loop_arg);
adjust_phi_and_debug_stmts (update_phi2, new_exit_e,
PHI_RESULT (new_phi));
/** 3. Handle loop-closed-ssa-form phis for first loop **/
/* 3.1. Find the relevant names that need an exit-phi in
GUARD_BB, i.e. names for which
slpeel_update_phi_nodes_for_guard1 had not already created a
phi node. This is the case for names that are used outside
the loop (and therefore need an exit phi) but are not updated
across loop iterations (and therefore don't have a
loop-header-phi).
slpeel_update_phi_nodes_for_guard1 is responsible for
creating loop-exit phis in GUARD_BB for names that have a
loop-header-phi. When such a phi is created we also record
the new name in its current definition. If this new name
exists, then guard_arg was set to this new name (see 1.2
above). Therefore, if guard_arg is not this new name, this
is an indication that an exit-phi in GUARD_BB was not yet
created, so we take care of it here. */
if (guard_arg == new_name2)
continue;
arg = guard_arg;
/* 3.2. Generate new phi node in GUARD_BB: */
new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
guard_edge->src);
/* 3.3. GUARD_BB has one incoming edge: */
gcc_assert (EDGE_COUNT (guard_edge->src->preds) == 1);
add_phi_arg (new_phi, arg, EDGE_PRED (guard_edge->src, 0),
UNKNOWN_LOCATION);
/* 3.4. Update phi in successor of GUARD_BB: */
gcc_assert (PHI_ARG_DEF_FROM_EDGE (update_phi2, guard_edge)
== guard_arg);
adjust_phi_and_debug_stmts (update_phi2, guard_edge,
PHI_RESULT (new_phi));
}
}
/* Make the LOOP iterate NITERS times. This is done by adding a new IV
that starts at zero, increases by one and its limit is NITERS.
Assumption: the exit-condition of LOOP is the last stmt in the loop. */
void
slpeel_make_loop_iterate_ntimes (struct loop *loop, tree niters)
{
tree indx_before_incr, indx_after_incr;
gimple cond_stmt;
gimple orig_cond;
edge exit_edge = single_exit (loop);
gimple_stmt_iterator loop_cond_gsi;
gimple_stmt_iterator incr_gsi;
bool insert_after;
tree init = build_int_cst (TREE_TYPE (niters), 0);
tree step = build_int_cst (TREE_TYPE (niters), 1);
LOC loop_loc;
enum tree_code code;
orig_cond = get_loop_exit_condition (loop);
gcc_assert (orig_cond);
loop_cond_gsi = gsi_for_stmt (orig_cond);
standard_iv_increment_position (loop, &incr_gsi, &insert_after);
create_iv (init, step, NULL_TREE, loop,
&incr_gsi, insert_after, &indx_before_incr, &indx_after_incr);
indx_after_incr = force_gimple_operand_gsi (&loop_cond_gsi, indx_after_incr,
true, NULL_TREE, true,
GSI_SAME_STMT);
niters = force_gimple_operand_gsi (&loop_cond_gsi, niters, true, NULL_TREE,
true, GSI_SAME_STMT);
code = (exit_edge->flags & EDGE_TRUE_VALUE) ? GE_EXPR : LT_EXPR;
cond_stmt = gimple_build_cond (code, indx_after_incr, niters, NULL_TREE,
NULL_TREE);
gsi_insert_before (&loop_cond_gsi, cond_stmt, GSI_SAME_STMT);
/* Remove old loop exit test: */
gsi_remove (&loop_cond_gsi, true);
loop_loc = find_loop_location (loop);
if (dump_file && (dump_flags & TDF_DETAILS))
{
if (loop_loc != UNKNOWN_LOC)
fprintf (dump_file, "\nloop at %s:%d: ",
LOC_FILE (loop_loc), LOC_LINE (loop_loc));
print_gimple_stmt (dump_file, cond_stmt, 0, TDF_SLIM);
}
loop->nb_iterations = niters;
}
/* Given LOOP this function generates a new copy of it and puts it
on E which is either the entry or exit of LOOP. */
struct loop *
slpeel_tree_duplicate_loop_to_edge_cfg (struct loop *loop, edge e)
{
struct loop *new_loop;
basic_block *new_bbs, *bbs;
bool at_exit;
bool was_imm_dom;
basic_block exit_dest;
gimple phi;
tree phi_arg;
edge exit, new_exit;
gimple_stmt_iterator gsi;
at_exit = (e == single_exit (loop));
if (!at_exit && e != loop_preheader_edge (loop))
return NULL;
bbs = get_loop_body (loop);
/* Check whether duplication is possible. */
if (!can_copy_bbs_p (bbs, loop->num_nodes))
{
free (bbs);
return NULL;
}
/* Generate new loop structure. */
new_loop = duplicate_loop (loop, loop_outer (loop));
if (!new_loop)
{
free (bbs);
return NULL;
}
exit_dest = single_exit (loop)->dest;
was_imm_dom = (get_immediate_dominator (CDI_DOMINATORS,
exit_dest) == loop->header ?
true : false);
new_bbs = XNEWVEC (basic_block, loop->num_nodes);
exit = single_exit (loop);
copy_bbs (bbs, loop->num_nodes, new_bbs,
&exit, 1, &new_exit, NULL,
e->src);
/* Duplicating phi args at exit bbs as coming
also from exit of duplicated loop. */
for (gsi = gsi_start_phis (exit_dest); !gsi_end_p (gsi); gsi_next (&gsi))
{
phi = gsi_stmt (gsi);
phi_arg = PHI_ARG_DEF_FROM_EDGE (phi, single_exit (loop));
if (phi_arg)
{
edge new_loop_exit_edge;
source_location locus;
locus = gimple_phi_arg_location_from_edge (phi, single_exit (loop));
if (EDGE_SUCC (new_loop->header, 0)->dest == new_loop->latch)
new_loop_exit_edge = EDGE_SUCC (new_loop->header, 1);
else
new_loop_exit_edge = EDGE_SUCC (new_loop->header, 0);
add_phi_arg (phi, phi_arg, new_loop_exit_edge, locus);
}
}
if (at_exit) /* Add the loop copy at exit. */
{
redirect_edge_and_branch_force (e, new_loop->header);
PENDING_STMT (e) = NULL;
set_immediate_dominator (CDI_DOMINATORS, new_loop->header, e->src);
if (was_imm_dom)
set_immediate_dominator (CDI_DOMINATORS, exit_dest, new_loop->header);
}
else /* Add the copy at entry. */
{
edge new_exit_e;
edge entry_e = loop_preheader_edge (loop);
basic_block preheader = entry_e->src;
if (!flow_bb_inside_loop_p (new_loop,
EDGE_SUCC (new_loop->header, 0)->dest))
new_exit_e = EDGE_SUCC (new_loop->header, 0);
else
new_exit_e = EDGE_SUCC (new_loop->header, 1);
redirect_edge_and_branch_force (new_exit_e, loop->header);
PENDING_STMT (new_exit_e) = NULL;
set_immediate_dominator (CDI_DOMINATORS, loop->header,
new_exit_e->src);
/* We have to add phi args to the loop->header here as coming
from new_exit_e edge. */
for (gsi = gsi_start_phis (loop->header);
!gsi_end_p (gsi);
gsi_next (&gsi))
{
phi = gsi_stmt (gsi);
phi_arg = PHI_ARG_DEF_FROM_EDGE (phi, entry_e);
if (phi_arg)
add_phi_arg (phi, phi_arg, new_exit_e,
gimple_phi_arg_location_from_edge (phi, entry_e));
}
redirect_edge_and_branch_force (entry_e, new_loop->header);
PENDING_STMT (entry_e) = NULL;
set_immediate_dominator (CDI_DOMINATORS, new_loop->header, preheader);
}
free (new_bbs);
free (bbs);
return new_loop;
}
/* Given the condition statement COND, put it as the last statement
of GUARD_BB; EXIT_BB is the basic block to skip the loop;
Assumes that this is the single exit of the guarded loop.
Returns the skip edge, inserts new stmts on the COND_EXPR_STMT_LIST. */
static edge
slpeel_add_loop_guard (basic_block guard_bb, tree cond,
gimple_seq cond_expr_stmt_list,
basic_block exit_bb, basic_block dom_bb)
{
gimple_stmt_iterator gsi;
edge new_e, enter_e;
gimple cond_stmt;
gimple_seq gimplify_stmt_list = NULL;
enter_e = EDGE_SUCC (guard_bb, 0);
enter_e->flags &= ~EDGE_FALLTHRU;
enter_e->flags |= EDGE_FALSE_VALUE;
gsi = gsi_last_bb (guard_bb);
cond = force_gimple_operand (cond, &gimplify_stmt_list, true, NULL_TREE);
if (gimplify_stmt_list)
gimple_seq_add_seq (&cond_expr_stmt_list, gimplify_stmt_list);
cond_stmt = gimple_build_cond (NE_EXPR,
cond, build_int_cst (TREE_TYPE (cond), 0),
NULL_TREE, NULL_TREE);
if (cond_expr_stmt_list)
gsi_insert_seq_after (&gsi, cond_expr_stmt_list, GSI_NEW_STMT);
gsi = gsi_last_bb (guard_bb);
gsi_insert_after (&gsi, cond_stmt, GSI_NEW_STMT);
/* Add new edge to connect guard block to the merge/loop-exit block. */
new_e = make_edge (guard_bb, exit_bb, EDGE_TRUE_VALUE);
set_immediate_dominator (CDI_DOMINATORS, exit_bb, dom_bb);
return new_e;
}
/* This function verifies that the following restrictions apply to LOOP:
(1) it is innermost
(2) it consists of exactly 2 basic blocks - header, and an empty latch.
(3) it is single entry, single exit
(4) its exit condition is the last stmt in the header
(5) E is the entry/exit edge of LOOP.
*/
bool
slpeel_can_duplicate_loop_p (const struct loop *loop, const_edge e)
{
edge exit_e = single_exit (loop);
edge entry_e = loop_preheader_edge (loop);
gimple orig_cond = get_loop_exit_condition (loop);
gimple_stmt_iterator loop_exit_gsi = gsi_last_bb (exit_e->src);
if (need_ssa_update_p (cfun))
return false;
if (loop->inner
/* All loops have an outer scope; the only case loop->outer is NULL is for
the function itself. */
|| !loop_outer (loop)
|| loop->num_nodes != 2
|| !empty_block_p (loop->latch)
|| !single_exit (loop)
/* Verify that new loop exit condition can be trivially modified. */
|| (!orig_cond || orig_cond != gsi_stmt (loop_exit_gsi))
|| (e != exit_e && e != entry_e))
return false;
return true;
}
#ifdef ENABLE_CHECKING
static void
slpeel_verify_cfg_after_peeling (struct loop *first_loop,
struct loop *second_loop)
{
basic_block loop1_exit_bb = single_exit (first_loop)->dest;
basic_block loop2_entry_bb = loop_preheader_edge (second_loop)->src;
basic_block loop1_entry_bb = loop_preheader_edge (first_loop)->src;
/* A guard that controls whether the second_loop is to be executed or skipped
is placed in first_loop->exit. first_loop->exit therefore has two
successors - one is the preheader of second_loop, and the other is a bb
after second_loop.
*/
gcc_assert (EDGE_COUNT (loop1_exit_bb->succs) == 2);
/* 1. Verify that one of the successors of first_loop->exit is the preheader
of second_loop. */
/* The preheader of new_loop is expected to have two predecessors:
first_loop->exit and the block that precedes first_loop. */
gcc_assert (EDGE_COUNT (loop2_entry_bb->preds) == 2
&& ((EDGE_PRED (loop2_entry_bb, 0)->src == loop1_exit_bb
&& EDGE_PRED (loop2_entry_bb, 1)->src == loop1_entry_bb)
|| (EDGE_PRED (loop2_entry_bb, 1)->src == loop1_exit_bb
&& EDGE_PRED (loop2_entry_bb, 0)->src == loop1_entry_bb)));
/* Verify that the other successor of first_loop->exit is after the
second_loop. */
/* TODO */
}
#endif
/* If the run time cost model check determines that vectorization is
not profitable and hence scalar loop should be generated then set
FIRST_NITERS to prologue peeled iterations. This will allow all the
iterations to be executed in the prologue peeled scalar loop. */
static void
set_prologue_iterations (basic_block bb_before_first_loop,
tree first_niters,
struct loop *loop,
unsigned int th)
{
edge e;
basic_block cond_bb, then_bb;
tree var, prologue_after_cost_adjust_name;
gimple_stmt_iterator gsi;
gimple newphi;
edge e_true, e_false, e_fallthru;
gimple cond_stmt;
gimple_seq gimplify_stmt_list = NULL, stmts = NULL;
tree cost_pre_condition = NULL_TREE;
tree scalar_loop_iters =
unshare_expr (LOOP_VINFO_NITERS_UNCHANGED (loop_vec_info_for_loop (loop)));
e = single_pred_edge (bb_before_first_loop);
cond_bb = split_edge(e);
e = single_pred_edge (bb_before_first_loop);
then_bb = split_edge(e);
set_immediate_dominator (CDI_DOMINATORS, then_bb, cond_bb);
e_false = make_single_succ_edge (cond_bb, bb_before_first_loop,
EDGE_FALSE_VALUE);
set_immediate_dominator (CDI_DOMINATORS, bb_before_first_loop, cond_bb);
e_true = EDGE_PRED (then_bb, 0);
e_true->flags &= ~EDGE_FALLTHRU;
e_true->flags |= EDGE_TRUE_VALUE;
e_fallthru = EDGE_SUCC (then_bb, 0);
cost_pre_condition =
fold_build2 (LE_EXPR, boolean_type_node, scalar_loop_iters,
build_int_cst (TREE_TYPE (scalar_loop_iters), th));
cost_pre_condition =
force_gimple_operand (cost_pre_condition, &gimplify_stmt_list,
true, NULL_TREE);
cond_stmt = gimple_build_cond (NE_EXPR, cost_pre_condition,
build_int_cst (TREE_TYPE (cost_pre_condition),
0), NULL_TREE, NULL_TREE);
gsi = gsi_last_bb (cond_bb);
if (gimplify_stmt_list)
gsi_insert_seq_after (&gsi, gimplify_stmt_list, GSI_NEW_STMT);
gsi = gsi_last_bb (cond_bb);
gsi_insert_after (&gsi, cond_stmt, GSI_NEW_STMT);
var = create_tmp_var (TREE_TYPE (scalar_loop_iters),
"prologue_after_cost_adjust");
add_referenced_var (var);
prologue_after_cost_adjust_name =
force_gimple_operand (scalar_loop_iters, &stmts, false, var);
gsi = gsi_last_bb (then_bb);
if (stmts)
gsi_insert_seq_after (&gsi, stmts, GSI_NEW_STMT);
newphi = create_phi_node (var, bb_before_first_loop);
add_phi_arg (newphi, prologue_after_cost_adjust_name, e_fallthru,
UNKNOWN_LOCATION);
add_phi_arg (newphi, first_niters, e_false, UNKNOWN_LOCATION);
first_niters = PHI_RESULT (newphi);
}
/* Function slpeel_tree_peel_loop_to_edge.
Peel the first (last) iterations of LOOP into a new prolog (epilog) loop
that is placed on the entry (exit) edge E of LOOP. After this transformation
we have two loops one after the other - first-loop iterates FIRST_NITERS
times, and second-loop iterates the remainder NITERS - FIRST_NITERS times.
If the cost model indicates that it is profitable to emit a scalar
loop instead of the vector one, then the prolog (epilog) loop will iterate
for the entire unchanged scalar iterations of the loop.
Input:
- LOOP: the loop to be peeled.
- E: the exit or entry edge of LOOP.
If it is the entry edge, we peel the first iterations of LOOP. In this
case first-loop is LOOP, and second-loop is the newly created loop.
If it is the exit edge, we peel the last iterations of LOOP. In this
case, first-loop is the newly created loop, and second-loop is LOOP.
- NITERS: the number of iterations that LOOP iterates.
- FIRST_NITERS: the number of iterations that the first-loop should iterate.
- UPDATE_FIRST_LOOP_COUNT: specified whether this function is responsible
for updating the loop bound of the first-loop to FIRST_NITERS. If it
is false, the caller of this function may want to take care of this
(this can be useful if we don't want new stmts added to first-loop).
- TH: cost model profitability threshold of iterations for vectorization.
- CHECK_PROFITABILITY: specify whether cost model check has not occurred
during versioning and hence needs to occur during
prologue generation or whether cost model check
has not occurred during prologue generation and hence
needs to occur during epilogue generation.
Output:
The function returns a pointer to the new loop-copy, or NULL if it failed
to perform the transformation.
The function generates two if-then-else guards: one before the first loop,
and the other before the second loop:
The first guard is:
if (FIRST_NITERS == 0) then skip the first loop,
and go directly to the second loop.
The second guard is:
if (FIRST_NITERS == NITERS) then skip the second loop.
If the optional COND_EXPR and COND_EXPR_STMT_LIST arguments are given
then the generated condition is combined with COND_EXPR and the
statements in COND_EXPR_STMT_LIST are emitted together with it.
FORNOW only simple loops are supported (see slpeel_can_duplicate_loop_p).
FORNOW the resulting code will not be in loop-closed-ssa form.
*/
static struct loop*
slpeel_tree_peel_loop_to_edge (struct loop *loop,
edge e, tree first_niters,
tree niters, bool update_first_loop_count,
unsigned int th, bool check_profitability,
tree cond_expr, gimple_seq cond_expr_stmt_list)
{
struct loop *new_loop = NULL, *first_loop, *second_loop;
edge skip_e;
tree pre_condition = NULL_TREE;
bitmap definitions;
basic_block bb_before_second_loop, bb_after_second_loop;
basic_block bb_before_first_loop;
basic_block bb_between_loops;
basic_block new_exit_bb;
edge exit_e = single_exit (loop);
LOC loop_loc;
tree cost_pre_condition = NULL_TREE;
if (!slpeel_can_duplicate_loop_p (loop, e))
return NULL;
/* We have to initialize cfg_hooks. Then, when calling
cfg_hooks->split_edge, the function tree_split_edge
is actually called and, when calling cfg_hooks->duplicate_block,
the function tree_duplicate_bb is called. */
gimple_register_cfg_hooks ();
/* 1. Generate a copy of LOOP and put it on E (E is the entry/exit of LOOP).
Resulting CFG would be:
first_loop:
do {
} while ...
second_loop:
do {
} while ...
orig_exit_bb:
*/
if (!(new_loop = slpeel_tree_duplicate_loop_to_edge_cfg (loop, e)))
{
loop_loc = find_loop_location (loop);
if (dump_file && (dump_flags & TDF_DETAILS))
{
if (loop_loc != UNKNOWN_LOC)
fprintf (dump_file, "\n%s:%d: note: ",
LOC_FILE (loop_loc), LOC_LINE (loop_loc));
fprintf (dump_file, "tree_duplicate_loop_to_edge_cfg failed.\n");
}
return NULL;
}
if (MAY_HAVE_DEBUG_STMTS)
{
gcc_assert (!adjust_vec);
adjust_vec = VEC_alloc (adjust_info, stack, 32);
}
if (e == exit_e)
{
/* NEW_LOOP was placed after LOOP. */
first_loop = loop;
second_loop = new_loop;
}
else
{
/* NEW_LOOP was placed before LOOP. */
first_loop = new_loop;
second_loop = loop;
}
definitions = ssa_names_to_replace ();
slpeel_update_phis_for_duplicate_loop (loop, new_loop, e == exit_e);
rename_variables_in_loop (new_loop);
/* 2. Add the guard code in one of the following ways:
2.a Add the guard that controls whether the first loop is executed.
This occurs when this function is invoked for prologue or epilogue
generation and when the cost model check can be done at compile time.
Resulting CFG would be:
bb_before_first_loop:
if (FIRST_NITERS == 0) GOTO bb_before_second_loop
GOTO first-loop
first_loop:
do {
} while ...
bb_before_second_loop:
second_loop:
do {
} while ...
orig_exit_bb:
2.b Add the cost model check that allows the prologue
to iterate for the entire unchanged scalar
iterations of the loop in the event that the cost
model indicates that the scalar loop is more
profitable than the vector one. This occurs when
this function is invoked for prologue generation
and the cost model check needs to be done at run
time.
Resulting CFG after prologue peeling would be:
if (scalar_loop_iterations <= th)
FIRST_NITERS = scalar_loop_iterations
bb_before_first_loop:
if (FIRST_NITERS == 0) GOTO bb_before_second_loop
GOTO first-loop
first_loop:
do {
} while ...
bb_before_second_loop:
second_loop:
do {
} while ...
orig_exit_bb:
2.c Add the cost model check that allows the epilogue
to iterate for the entire unchanged scalar
iterations of the loop in the event that the cost
model indicates that the scalar loop is more
profitable than the vector one. This occurs when
this function is invoked for epilogue generation
and the cost model check needs to be done at run
time. This check is combined with any pre-existing
check in COND_EXPR to avoid versioning.
Resulting CFG after prologue peeling would be:
bb_before_first_loop:
if ((scalar_loop_iterations <= th)
||
FIRST_NITERS == 0) GOTO bb_before_second_loop
GOTO first-loop
first_loop:
do {
} while ...
bb_before_second_loop:
second_loop:
do {
} while ...
orig_exit_bb:
*/
bb_before_first_loop = split_edge (loop_preheader_edge (first_loop));
bb_before_second_loop = split_edge (single_exit (first_loop));
/* Epilogue peeling. */
if (!update_first_loop_count)
{
pre_condition =
fold_build2 (LE_EXPR, boolean_type_node, first_niters,
build_int_cst (TREE_TYPE (first_niters), 0));
if (check_profitability)
{
tree scalar_loop_iters
= unshare_expr (LOOP_VINFO_NITERS_UNCHANGED
(loop_vec_info_for_loop (loop)));
cost_pre_condition =
fold_build2 (LE_EXPR, boolean_type_node, scalar_loop_iters,
build_int_cst (TREE_TYPE (scalar_loop_iters), th));
pre_condition = fold_build2 (TRUTH_OR_EXPR, boolean_type_node,
cost_pre_condition, pre_condition);
}
if (cond_expr)
{
pre_condition =
fold_build2 (TRUTH_OR_EXPR, boolean_type_node,
pre_condition,
fold_build1 (TRUTH_NOT_EXPR, boolean_type_node,
cond_expr));
}
}
/* Prologue peeling. */
else
{
if (check_profitability)
set_prologue_iterations (bb_before_first_loop, first_niters,
loop, th);
pre_condition =
fold_build2 (LE_EXPR, boolean_type_node, first_niters,
build_int_cst (TREE_TYPE (first_niters), 0));
}
skip_e = slpeel_add_loop_guard (bb_before_first_loop, pre_condition,
cond_expr_stmt_list,
bb_before_second_loop, bb_before_first_loop);
slpeel_update_phi_nodes_for_guard1 (skip_e, first_loop,
first_loop == new_loop,
&new_exit_bb, &definitions);
/* 3. Add the guard that controls whether the second loop is executed.
Resulting CFG would be:
bb_before_first_loop:
if (FIRST_NITERS == 0) GOTO bb_before_second_loop (skip first loop)
GOTO first-loop
first_loop:
do {
} while ...
bb_between_loops:
if (FIRST_NITERS == NITERS) GOTO bb_after_second_loop (skip second loop)
GOTO bb_before_second_loop
bb_before_second_loop:
second_loop:
do {
} while ...
bb_after_second_loop:
orig_exit_bb:
*/
bb_between_loops = new_exit_bb;
bb_after_second_loop = split_edge (single_exit (second_loop));
pre_condition =
fold_build2 (EQ_EXPR, boolean_type_node, first_niters, niters);
skip_e = slpeel_add_loop_guard (bb_between_loops, pre_condition, NULL,
bb_after_second_loop, bb_before_first_loop);
slpeel_update_phi_nodes_for_guard2 (skip_e, second_loop,
second_loop == new_loop, &new_exit_bb);
/* 4. Make first-loop iterate FIRST_NITERS times, if requested.
*/
if (update_first_loop_count)
slpeel_make_loop_iterate_ntimes (first_loop, first_niters);
adjust_vec_debug_stmts ();
BITMAP_FREE (definitions);
delete_update_ssa ();
return new_loop;
}
/* Function vect_get_loop_location.
Extract the location of the loop in the source code.
If the loop is not well formed for vectorization, an estimated
location is calculated.
Return the loop location if succeed and NULL if not. */
LOC
find_loop_location (struct loop *loop)
{
gimple stmt = NULL;
basic_block bb;
gimple_stmt_iterator si;
if (!loop)
return UNKNOWN_LOC;
stmt = get_loop_exit_condition (loop);
if (stmt && gimple_location (stmt) != UNKNOWN_LOC)
return gimple_location (stmt);
/* If we got here the loop is probably not "well formed",
try to estimate the loop location */
if (!loop->header)
return UNKNOWN_LOC;
bb = loop->header;
for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si))
{
stmt = gsi_stmt (si);
if (gimple_location (stmt) != UNKNOWN_LOC)
return gimple_location (stmt);
}
return UNKNOWN_LOC;
}
/* This function builds ni_name = number of iterations loop executes
on the loop preheader. If SEQ is given the stmt is instead emitted
there. */
static tree
vect_build_loop_niters (loop_vec_info loop_vinfo, gimple_seq seq)
{
tree ni_name, var;
gimple_seq stmts = NULL;
edge pe;
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
tree ni = unshare_expr (LOOP_VINFO_NITERS (loop_vinfo));
var = create_tmp_var (TREE_TYPE (ni), "niters");
add_referenced_var (var);
ni_name = force_gimple_operand (ni, &stmts, false, var);
pe = loop_preheader_edge (loop);
if (stmts)
{
if (seq)
gimple_seq_add_seq (&seq, stmts);
else
{
basic_block new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts);
gcc_assert (!new_bb);
}
}
return ni_name;
}
/* This function generates the following statements:
ni_name = number of iterations loop executes
ratio = ni_name / vf
ratio_mult_vf_name = ratio * vf
and places them at the loop preheader edge or in COND_EXPR_STMT_LIST
if that is non-NULL. */
static void
vect_generate_tmps_on_preheader (loop_vec_info loop_vinfo,
tree *ni_name_ptr,
tree *ratio_mult_vf_name_ptr,
tree *ratio_name_ptr,
gimple_seq cond_expr_stmt_list)
{
edge pe;
basic_block new_bb;
gimple_seq stmts;
tree ni_name;
tree var;
tree ratio_name;
tree ratio_mult_vf_name;
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
tree ni = LOOP_VINFO_NITERS (loop_vinfo);
int vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
tree log_vf;
pe = loop_preheader_edge (loop);
/* Generate temporary variable that contains
number of iterations loop executes. */
ni_name = vect_build_loop_niters (loop_vinfo, cond_expr_stmt_list);
log_vf = build_int_cst (TREE_TYPE (ni), exact_log2 (vf));
/* Create: ratio = ni >> log2(vf) */
ratio_name = fold_build2 (RSHIFT_EXPR, TREE_TYPE (ni_name), ni_name, log_vf);
if (!is_gimple_val (ratio_name))
{
var = create_tmp_var (TREE_TYPE (ni), "bnd");
add_referenced_var (var);
stmts = NULL;
ratio_name = force_gimple_operand (ratio_name, &stmts, true, var);
if (cond_expr_stmt_list)
gimple_seq_add_seq (&cond_expr_stmt_list, stmts);
else
{
pe = loop_preheader_edge (loop);
new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts);
gcc_assert (!new_bb);
}
}
/* Create: ratio_mult_vf = ratio << log2 (vf). */
ratio_mult_vf_name = fold_build2 (LSHIFT_EXPR, TREE_TYPE (ratio_name),
ratio_name, log_vf);
if (!is_gimple_val (ratio_mult_vf_name))
{
var = create_tmp_var (TREE_TYPE (ni), "ratio_mult_vf");
add_referenced_var (var);
stmts = NULL;
ratio_mult_vf_name = force_gimple_operand (ratio_mult_vf_name, &stmts,
true, var);
if (cond_expr_stmt_list)
gimple_seq_add_seq (&cond_expr_stmt_list, stmts);
else
{
pe = loop_preheader_edge (loop);
new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts);
gcc_assert (!new_bb);
}
}
*ni_name_ptr = ni_name;
*ratio_mult_vf_name_ptr = ratio_mult_vf_name;
*ratio_name_ptr = ratio_name;
return;
}
/* Function vect_can_advance_ivs_p
In case the number of iterations that LOOP iterates is unknown at compile
time, an epilog loop will be generated, and the loop induction variables
(IVs) will be "advanced" to the value they are supposed to take just before
the epilog loop. Here we check that the access function of the loop IVs
and the expression that represents the loop bound are simple enough.
These restrictions will be relaxed in the future. */
bool
vect_can_advance_ivs_p (loop_vec_info loop_vinfo)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
basic_block bb = loop->header;
gimple phi;
gimple_stmt_iterator gsi;
/* Analyze phi functions of the loop header. */
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "vect_can_advance_ivs_p:");
for (gsi = gsi_start_phis (bb); !gsi_end_p (gsi); gsi_next (&gsi))
{
tree access_fn = NULL;
tree evolution_part;
phi = gsi_stmt (gsi);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "Analyze phi: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
/* Skip virtual phi's. The data dependences that are associated with
virtual defs/uses (i.e., memory accesses) are analyzed elsewhere. */
if (!is_gimple_reg (SSA_NAME_VAR (PHI_RESULT (phi))))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "virtual phi. skip.");
continue;
}
/* Skip reduction phis. */
if (STMT_VINFO_DEF_TYPE (vinfo_for_stmt (phi)) == vect_reduction_def)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "reduc phi. skip.");
continue;
}
/* Analyze the evolution function. */
access_fn = instantiate_parameters
(loop, analyze_scalar_evolution (loop, PHI_RESULT (phi)));
if (!access_fn)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "No Access function.");
return false;
}
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "Access function of PHI: ");
print_generic_expr (vect_dump, access_fn, TDF_SLIM);
}
evolution_part = evolution_part_in_loop_num (access_fn, loop->num);
if (evolution_part == NULL_TREE)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "No evolution.");
return false;
}
/* FORNOW: We do not transform initial conditions of IVs
which evolution functions are a polynomial of degree >= 2. */
if (tree_is_chrec (evolution_part))
return false;
}
return true;
}
/* Function vect_update_ivs_after_vectorizer.
"Advance" the induction variables of LOOP to the value they should take
after the execution of LOOP. This is currently necessary because the
vectorizer does not handle induction variables that are used after the
loop. Such a situation occurs when the last iterations of LOOP are
peeled, because:
1. We introduced new uses after LOOP for IVs that were not originally used
after LOOP: the IVs of LOOP are now used by an epilog loop.
2. LOOP is going to be vectorized; this means that it will iterate N/VF
times, whereas the loop IVs should be bumped N times.
Input:
- LOOP - a loop that is going to be vectorized. The last few iterations
of LOOP were peeled.
- NITERS - the number of iterations that LOOP executes (before it is
vectorized). i.e, the number of times the ivs should be bumped.
- UPDATE_E - a successor edge of LOOP->exit that is on the (only) path
coming out from LOOP on which there are uses of the LOOP ivs
(this is the path from LOOP->exit to epilog_loop->preheader).
The new definitions of the ivs are placed in LOOP->exit.
The phi args associated with the edge UPDATE_E in the bb
UPDATE_E->dest are updated accordingly.
Assumption 1: Like the rest of the vectorizer, this function assumes
a single loop exit that has a single predecessor.
Assumption 2: The phi nodes in the LOOP header and in update_bb are
organized in the same order.
Assumption 3: The access function of the ivs is simple enough (see
vect_can_advance_ivs_p). This assumption will be relaxed in the future.
Assumption 4: Exactly one of the successors of LOOP exit-bb is on a path
coming out of LOOP on which the ivs of LOOP are used (this is the path
that leads to the epilog loop; other paths skip the epilog loop). This
path starts with the edge UPDATE_E, and its destination (denoted update_bb)
needs to have its phis updated.
*/
static void
vect_update_ivs_after_vectorizer (loop_vec_info loop_vinfo, tree niters,
edge update_e)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
basic_block exit_bb = single_exit (loop)->dest;
gimple phi, phi1;
gimple_stmt_iterator gsi, gsi1;
basic_block update_bb = update_e->dest;
/* gcc_assert (vect_can_advance_ivs_p (loop_vinfo)); */
/* Make sure there exists a single-predecessor exit bb: */
gcc_assert (single_pred_p (exit_bb));
for (gsi = gsi_start_phis (loop->header), gsi1 = gsi_start_phis (update_bb);
!gsi_end_p (gsi) && !gsi_end_p (gsi1);
gsi_next (&gsi), gsi_next (&gsi1))
{
tree access_fn = NULL;
tree evolution_part;
tree init_expr;
tree step_expr, off;
tree type;
tree var, ni, ni_name;
gimple_stmt_iterator last_gsi;
phi = gsi_stmt (gsi);
phi1 = gsi_stmt (gsi1);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "vect_update_ivs_after_vectorizer: phi: ");
print_gimple_stmt (vect_dump, phi, 0, TDF_SLIM);
}
/* Skip virtual phi's. */
if (!is_gimple_reg (SSA_NAME_VAR (PHI_RESULT (phi))))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "virtual phi. skip.");
continue;
}
/* Skip reduction phis. */
if (STMT_VINFO_DEF_TYPE (vinfo_for_stmt (phi)) == vect_reduction_def)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "reduc phi. skip.");
continue;
}
access_fn = analyze_scalar_evolution (loop, PHI_RESULT (phi));
gcc_assert (access_fn);
/* We can end up with an access_fn like
(short int) {(short unsigned int) i_49, +, 1}_1
for further analysis we need to strip the outer cast but we
need to preserve the original type. */
type = TREE_TYPE (access_fn);
STRIP_NOPS (access_fn);
evolution_part =
unshare_expr (evolution_part_in_loop_num (access_fn, loop->num));
gcc_assert (evolution_part != NULL_TREE);
/* FORNOW: We do not support IVs whose evolution function is a polynomial
of degree >= 2 or exponential. */
gcc_assert (!tree_is_chrec (evolution_part));
step_expr = evolution_part;
init_expr = unshare_expr (initial_condition_in_loop_num (access_fn,
loop->num));
init_expr = fold_convert (type, init_expr);
off = fold_build2 (MULT_EXPR, TREE_TYPE (step_expr),
fold_convert (TREE_TYPE (step_expr), niters),
step_expr);
if (POINTER_TYPE_P (TREE_TYPE (init_expr)))
ni = fold_build2 (POINTER_PLUS_EXPR, TREE_TYPE (init_expr),
init_expr,
fold_convert (sizetype, off));
else
ni = fold_build2 (PLUS_EXPR, TREE_TYPE (init_expr),
init_expr,
fold_convert (TREE_TYPE (init_expr), off));
var = create_tmp_var (TREE_TYPE (init_expr), "tmp");
add_referenced_var (var);
last_gsi = gsi_last_bb (exit_bb);
ni_name = force_gimple_operand_gsi (&last_gsi, ni, false, var,
true, GSI_SAME_STMT);
/* Fix phi expressions in the successor bb. */
adjust_phi_and_debug_stmts (phi1, update_e, ni_name);
}
}
/* Return the more conservative threshold between the
min_profitable_iters returned by the cost model and the user
specified threshold, if provided. */
static unsigned int
conservative_cost_threshold (loop_vec_info loop_vinfo,
int min_profitable_iters)
{
unsigned int th;
int min_scalar_loop_bound;
min_scalar_loop_bound = ((PARAM_VALUE (PARAM_MIN_VECT_LOOP_BOUND)
* LOOP_VINFO_VECT_FACTOR (loop_vinfo)) - 1);
/* Use the cost model only if it is more conservative than user specified
threshold. */
th = (unsigned) min_scalar_loop_bound;
if (min_profitable_iters
&& (!min_scalar_loop_bound
|| min_profitable_iters > min_scalar_loop_bound))
th = (unsigned) min_profitable_iters;
if (th && vect_print_dump_info (REPORT_COST))
fprintf (vect_dump, "Profitability threshold is %u loop iterations.", th);
return th;
}
/* Function vect_do_peeling_for_loop_bound
Peel the last iterations of the loop represented by LOOP_VINFO.
The peeled iterations form a new epilog loop. Given that the loop now
iterates NITERS times, the new epilog loop iterates
NITERS % VECTORIZATION_FACTOR times.
The original loop will later be made to iterate
NITERS / VECTORIZATION_FACTOR times (this value is placed into RATIO).
COND_EXPR and COND_EXPR_STMT_LIST are combined with a new generated
test. */
void
vect_do_peeling_for_loop_bound (loop_vec_info loop_vinfo, tree *ratio,
tree cond_expr, gimple_seq cond_expr_stmt_list)
{
tree ni_name, ratio_mult_vf_name;
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
struct loop *new_loop;
edge update_e;
basic_block preheader;
int loop_num;
bool check_profitability = false;
unsigned int th = 0;
int min_profitable_iters;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_do_peeling_for_loop_bound ===");
initialize_original_copy_tables ();
/* Generate the following variables on the preheader of original loop:
ni_name = number of iteration the original loop executes
ratio = ni_name / vf
ratio_mult_vf_name = ratio * vf */
vect_generate_tmps_on_preheader (loop_vinfo, &ni_name,
&ratio_mult_vf_name, ratio,
cond_expr_stmt_list);
loop_num = loop->num;
/* If cost model check not done during versioning and
peeling for alignment. */
if (!LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo)
&& !LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)
&& !LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo)
&& !cond_expr)
{
check_profitability = true;
/* Get profitability threshold for vectorized loop. */
min_profitable_iters = LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo);
th = conservative_cost_threshold (loop_vinfo,
min_profitable_iters);
}
new_loop = slpeel_tree_peel_loop_to_edge (loop, single_exit (loop),
ratio_mult_vf_name, ni_name, false,
th, check_profitability,
cond_expr, cond_expr_stmt_list);
gcc_assert (new_loop);
gcc_assert (loop_num == loop->num);
#ifdef ENABLE_CHECKING
slpeel_verify_cfg_after_peeling (loop, new_loop);
#endif
/* A guard that controls whether the new_loop is to be executed or skipped
is placed in LOOP->exit. LOOP->exit therefore has two successors - one
is the preheader of NEW_LOOP, where the IVs from LOOP are used. The other
is a bb after NEW_LOOP, where these IVs are not used. Find the edge that
is on the path where the LOOP IVs are used and need to be updated. */
preheader = loop_preheader_edge (new_loop)->src;
if (EDGE_PRED (preheader, 0)->src == single_exit (loop)->dest)
update_e = EDGE_PRED (preheader, 0);
else
update_e = EDGE_PRED (preheader, 1);
/* Update IVs of original loop as if they were advanced
by ratio_mult_vf_name steps. */
vect_update_ivs_after_vectorizer (loop_vinfo, ratio_mult_vf_name, update_e);
/* After peeling we have to reset scalar evolution analyzer. */
scev_reset ();
free_original_copy_tables ();
}
/* Function vect_gen_niters_for_prolog_loop
Set the number of iterations for the loop represented by LOOP_VINFO
to the minimum between LOOP_NITERS (the original iteration count of the loop)
and the misalignment of DR - the data reference recorded in
LOOP_VINFO_UNALIGNED_DR (LOOP_VINFO). As a result, after the execution of
this loop, the data reference DR will refer to an aligned location.
The following computation is generated:
If the misalignment of DR is known at compile time:
addr_mis = int mis = DR_MISALIGNMENT (dr);
Else, compute address misalignment in bytes:
addr_mis = addr & (vectype_size - 1)
prolog_niters = min (LOOP_NITERS, ((VF - addr_mis/elem_size)&(VF-1))/step)
(elem_size = element type size; an element is the scalar element whose type
is the inner type of the vectype)
When the step of the data-ref in the loop is not 1 (as in interleaved data
and SLP), the number of iterations of the prolog must be divided by the step
(which is equal to the size of interleaved group).
The above formulas assume that VF == number of elements in the vector. This
may not hold when there are multiple-types in the loop.
In this case, for some data-references in the loop the VF does not represent
the number of elements that fit in the vector. Therefore, instead of VF we
use TYPE_VECTOR_SUBPARTS. */
static tree
vect_gen_niters_for_prolog_loop (loop_vec_info loop_vinfo, tree loop_niters,
tree *wide_prolog_niters)
{
struct data_reference *dr = LOOP_VINFO_UNALIGNED_DR (loop_vinfo);
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
tree var;
gimple_seq stmts;
tree iters, iters_name;
edge pe;
basic_block new_bb;
gimple dr_stmt = DR_STMT (dr);
stmt_vec_info stmt_info = vinfo_for_stmt (dr_stmt);
tree vectype = STMT_VINFO_VECTYPE (stmt_info);
int vectype_align = TYPE_ALIGN (vectype) / BITS_PER_UNIT;
tree niters_type = TREE_TYPE (loop_niters);
int step = 1;
int element_size = GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (DR_REF (dr))));
int nelements = TYPE_VECTOR_SUBPARTS (vectype);
if (STMT_VINFO_STRIDED_ACCESS (stmt_info))
step = DR_GROUP_SIZE (vinfo_for_stmt (DR_GROUP_FIRST_DR (stmt_info)));
pe = loop_preheader_edge (loop);
if (LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo) > 0)
{
int byte_misalign = LOOP_PEELING_FOR_ALIGNMENT (loop_vinfo);
int elem_misalign = byte_misalign / element_size;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "known alignment = %d.", byte_misalign);
iters = build_int_cst (niters_type,
(((nelements - elem_misalign) & (nelements - 1)) / step));
}
else
{
gimple_seq new_stmts = NULL;
tree start_addr = vect_create_addr_base_for_vector_ref (dr_stmt,
&new_stmts, NULL_TREE, loop);
tree ptr_type = TREE_TYPE (start_addr);
tree size = TYPE_SIZE (ptr_type);
tree type = lang_hooks.types.type_for_size (tree_low_cst (size, 1), 1);
tree vectype_size_minus_1 = build_int_cst (type, vectype_align - 1);
tree elem_size_log =
build_int_cst (type, exact_log2 (vectype_align/nelements));
tree nelements_minus_1 = build_int_cst (type, nelements - 1);
tree nelements_tree = build_int_cst (type, nelements);
tree byte_misalign;
tree elem_misalign;
new_bb = gsi_insert_seq_on_edge_immediate (pe, new_stmts);
gcc_assert (!new_bb);
/* Create: byte_misalign = addr & (vectype_size - 1) */
byte_misalign =
fold_build2 (BIT_AND_EXPR, type, fold_convert (type, start_addr), vectype_size_minus_1);
/* Create: elem_misalign = byte_misalign / element_size */
elem_misalign =
fold_build2 (RSHIFT_EXPR, type, byte_misalign, elem_size_log);
/* Create: (niters_type) (nelements - elem_misalign)&(nelements - 1) */
iters = fold_build2 (MINUS_EXPR, type, nelements_tree, elem_misalign);
iters = fold_build2 (BIT_AND_EXPR, type, iters, nelements_minus_1);
iters = fold_convert (niters_type, iters);
}
/* Create: prolog_loop_niters = min (iters, loop_niters) */
/* If the loop bound is known at compile time we already verified that it is
greater than vf; since the misalignment ('iters') is at most vf, there's
no need to generate the MIN_EXPR in this case. */
if (TREE_CODE (loop_niters) != INTEGER_CST)
iters = fold_build2 (MIN_EXPR, niters_type, iters, loop_niters);
if (vect_print_dump_info (REPORT_DETAILS))
{
fprintf (vect_dump, "niters for prolog loop: ");
print_generic_expr (vect_dump, iters, TDF_SLIM);
}
var = create_tmp_var (niters_type, "prolog_loop_niters");
add_referenced_var (var);
stmts = NULL;
iters_name = force_gimple_operand (iters, &stmts, false, var);
if (types_compatible_p (sizetype, niters_type))
*wide_prolog_niters = iters_name;
else
{
gimple_seq seq = NULL;
tree wide_iters = fold_convert (sizetype, iters);
var = create_tmp_var (sizetype, "prolog_loop_niters");
add_referenced_var (var);
*wide_prolog_niters = force_gimple_operand (wide_iters, &seq, false,
var);
if (seq)
gimple_seq_add_seq (&stmts, seq);
}
/* Insert stmt on loop preheader edge. */
if (stmts)
{
basic_block new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts);
gcc_assert (!new_bb);
}
return iters_name;
}
/* Function vect_update_init_of_dr
NITERS iterations were peeled from LOOP. DR represents a data reference
in LOOP. This function updates the information recorded in DR to
account for the fact that the first NITERS iterations had already been
executed. Specifically, it updates the OFFSET field of DR. */
static void
vect_update_init_of_dr (struct data_reference *dr, tree niters)
{
tree offset = DR_OFFSET (dr);
niters = fold_build2 (MULT_EXPR, sizetype,
fold_convert (sizetype, niters),
fold_convert (sizetype, DR_STEP (dr)));
offset = fold_build2 (PLUS_EXPR, sizetype,
fold_convert (sizetype, offset), niters);
DR_OFFSET (dr) = offset;
}
/* Function vect_update_inits_of_drs
NITERS iterations were peeled from the loop represented by LOOP_VINFO.
This function updates the information recorded for the data references in
the loop to account for the fact that the first NITERS iterations had
already been executed. Specifically, it updates the initial_condition of
the access_function of all the data_references in the loop. */
static void
vect_update_inits_of_drs (loop_vec_info loop_vinfo, tree niters)
{
unsigned int i;
VEC (data_reference_p, heap) *datarefs = LOOP_VINFO_DATAREFS (loop_vinfo);
struct data_reference *dr;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_update_inits_of_dr ===");
for (i = 0; VEC_iterate (data_reference_p, datarefs, i, dr); i++)
vect_update_init_of_dr (dr, niters);
}
/* Function vect_do_peeling_for_alignment
Peel the first 'niters' iterations of the loop represented by LOOP_VINFO.
'niters' is set to the misalignment of one of the data references in the
loop, thereby forcing it to refer to an aligned location at the beginning
of the execution of this loop. The data reference for which we are
peeling is recorded in LOOP_VINFO_UNALIGNED_DR. */
void
vect_do_peeling_for_alignment (loop_vec_info loop_vinfo)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
tree niters_of_prolog_loop, ni_name;
tree n_iters;
tree wide_prolog_niters;
struct loop *new_loop;
unsigned int th = 0;
int min_profitable_iters;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "=== vect_do_peeling_for_alignment ===");
initialize_original_copy_tables ();
ni_name = vect_build_loop_niters (loop_vinfo, NULL);
niters_of_prolog_loop = vect_gen_niters_for_prolog_loop (loop_vinfo, ni_name,
&wide_prolog_niters);
/* Get profitability threshold for vectorized loop. */
min_profitable_iters = LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo);
th = conservative_cost_threshold (loop_vinfo,
min_profitable_iters);
/* Peel the prolog loop and iterate it niters_of_prolog_loop. */
new_loop =
slpeel_tree_peel_loop_to_edge (loop, loop_preheader_edge (loop),
niters_of_prolog_loop, ni_name, true,
th, true, NULL_TREE, NULL);
gcc_assert (new_loop);
#ifdef ENABLE_CHECKING
slpeel_verify_cfg_after_peeling (new_loop, loop);
#endif
/* Update number of times loop executes. */
n_iters = LOOP_VINFO_NITERS (loop_vinfo);
LOOP_VINFO_NITERS (loop_vinfo) = fold_build2 (MINUS_EXPR,
TREE_TYPE (n_iters), n_iters, niters_of_prolog_loop);
/* Update the init conditions of the access functions of all data refs. */
vect_update_inits_of_drs (loop_vinfo, wide_prolog_niters);
/* After peeling we have to reset scalar evolution analyzer. */
scev_reset ();
free_original_copy_tables ();
}
/* Function vect_create_cond_for_align_checks.
Create a conditional expression that represents the alignment checks for
all of data references (array element references) whose alignment must be
checked at runtime.
Input:
COND_EXPR - input conditional expression. New conditions will be chained
with logical AND operation.
LOOP_VINFO - two fields of the loop information are used.
LOOP_VINFO_PTR_MASK is the mask used to check the alignment.
LOOP_VINFO_MAY_MISALIGN_STMTS contains the refs to be checked.
Output:
COND_EXPR_STMT_LIST - statements needed to construct the conditional
expression.
The returned value is the conditional expression to be used in the if
statement that controls which version of the loop gets executed at runtime.
The algorithm makes two assumptions:
1) The number of bytes "n" in a vector is a power of 2.
2) An address "a" is aligned if a%n is zero and that this
test can be done as a&(n-1) == 0. For example, for 16
byte vectors the test is a&0xf == 0. */
static void
vect_create_cond_for_align_checks (loop_vec_info loop_vinfo,
tree *cond_expr,
gimple_seq *cond_expr_stmt_list)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
VEC(gimple,heap) *may_misalign_stmts
= LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo);
gimple ref_stmt;
int mask = LOOP_VINFO_PTR_MASK (loop_vinfo);
tree mask_cst;
unsigned int i;
tree psize;
tree int_ptrsize_type;
char tmp_name[20];
tree or_tmp_name = NULL_TREE;
tree and_tmp, and_tmp_name;
gimple and_stmt;
tree ptrsize_zero;
tree part_cond_expr;
/* Check that mask is one less than a power of 2, i.e., mask is
all zeros followed by all ones. */
gcc_assert ((mask != 0) && ((mask & (mask+1)) == 0));
/* CHECKME: what is the best integer or unsigned type to use to hold a
cast from a pointer value? */
psize = TYPE_SIZE (ptr_type_node);
int_ptrsize_type
= lang_hooks.types.type_for_size (tree_low_cst (psize, 1), 0);
/* Create expression (mask & (dr_1 || ... || dr_n)) where dr_i is the address
of the first vector of the i'th data reference. */
for (i = 0; VEC_iterate (gimple, may_misalign_stmts, i, ref_stmt); i++)
{
gimple_seq new_stmt_list = NULL;
tree addr_base;
tree addr_tmp, addr_tmp_name;
tree or_tmp, new_or_tmp_name;
gimple addr_stmt, or_stmt;
/* create: addr_tmp = (int)(address_of_first_vector) */
addr_base =
vect_create_addr_base_for_vector_ref (ref_stmt, &new_stmt_list,
NULL_TREE, loop);
if (new_stmt_list != NULL)
gimple_seq_add_seq (cond_expr_stmt_list, new_stmt_list);
sprintf (tmp_name, "%s%d", "addr2int", i);
addr_tmp = create_tmp_var (int_ptrsize_type, tmp_name);
add_referenced_var (addr_tmp);
addr_tmp_name = make_ssa_name (addr_tmp, NULL);
addr_stmt = gimple_build_assign_with_ops (NOP_EXPR, addr_tmp_name,
addr_base, NULL_TREE);
SSA_NAME_DEF_STMT (addr_tmp_name) = addr_stmt;
gimple_seq_add_stmt (cond_expr_stmt_list, addr_stmt);
/* The addresses are OR together. */
if (or_tmp_name != NULL_TREE)
{
/* create: or_tmp = or_tmp | addr_tmp */
sprintf (tmp_name, "%s%d", "orptrs", i);
or_tmp = create_tmp_var (int_ptrsize_type, tmp_name);
add_referenced_var (or_tmp);
new_or_tmp_name = make_ssa_name (or_tmp, NULL);
or_stmt = gimple_build_assign_with_ops (BIT_IOR_EXPR,
new_or_tmp_name,
or_tmp_name, addr_tmp_name);
SSA_NAME_DEF_STMT (new_or_tmp_name) = or_stmt;
gimple_seq_add_stmt (cond_expr_stmt_list, or_stmt);
or_tmp_name = new_or_tmp_name;
}
else
or_tmp_name = addr_tmp_name;
} /* end for i */
mask_cst = build_int_cst (int_ptrsize_type, mask);
/* create: and_tmp = or_tmp & mask */
and_tmp = create_tmp_var (int_ptrsize_type, "andmask" );
add_referenced_var (and_tmp);
and_tmp_name = make_ssa_name (and_tmp, NULL);
and_stmt = gimple_build_assign_with_ops (BIT_AND_EXPR, and_tmp_name,
or_tmp_name, mask_cst);
SSA_NAME_DEF_STMT (and_tmp_name) = and_stmt;
gimple_seq_add_stmt (cond_expr_stmt_list, and_stmt);
/* Make and_tmp the left operand of the conditional test against zero.
if and_tmp has a nonzero bit then some address is unaligned. */
ptrsize_zero = build_int_cst (int_ptrsize_type, 0);
part_cond_expr = fold_build2 (EQ_EXPR, boolean_type_node,
and_tmp_name, ptrsize_zero);
if (*cond_expr)
*cond_expr = fold_build2 (TRUTH_AND_EXPR, boolean_type_node,
*cond_expr, part_cond_expr);
else
*cond_expr = part_cond_expr;
}
/* Function vect_vfa_segment_size.
Create an expression that computes the size of segment
that will be accessed for a data reference. The functions takes into
account that realignment loads may access one more vector.
Input:
DR: The data reference.
VECT_FACTOR: vectorization factor.
Return an expression whose value is the size of segment which will be
accessed by DR. */
static tree
vect_vfa_segment_size (struct data_reference *dr, tree vect_factor)
{
tree segment_length = fold_build2 (MULT_EXPR, integer_type_node,
DR_STEP (dr), vect_factor);
if (vect_supportable_dr_alignment (dr) == dr_explicit_realign_optimized)
{
tree vector_size = TYPE_SIZE_UNIT
(STMT_VINFO_VECTYPE (vinfo_for_stmt (DR_STMT (dr))));
segment_length = fold_build2 (PLUS_EXPR, integer_type_node,
segment_length, vector_size);
}
return fold_convert (sizetype, segment_length);
}
/* Function vect_create_cond_for_alias_checks.
Create a conditional expression that represents the run-time checks for
overlapping of address ranges represented by a list of data references
relations passed as input.
Input:
COND_EXPR - input conditional expression. New conditions will be chained
with logical AND operation.
LOOP_VINFO - field LOOP_VINFO_MAY_ALIAS_STMTS contains the list of ddrs
to be checked.
Output:
COND_EXPR - conditional expression.
COND_EXPR_STMT_LIST - statements needed to construct the conditional
expression.
The returned value is the conditional expression to be used in the if
statement that controls which version of the loop gets executed at runtime.
*/
static void
vect_create_cond_for_alias_checks (loop_vec_info loop_vinfo,
tree * cond_expr,
gimple_seq * cond_expr_stmt_list)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
VEC (ddr_p, heap) * may_alias_ddrs =
LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo);
tree vect_factor =
build_int_cst (integer_type_node, LOOP_VINFO_VECT_FACTOR (loop_vinfo));
ddr_p ddr;
unsigned int i;
tree part_cond_expr;
/* Create expression
((store_ptr_0 + store_segment_length_0) < load_ptr_0)
|| (load_ptr_0 + load_segment_length_0) < store_ptr_0))
&&
...
&&
((store_ptr_n + store_segment_length_n) < load_ptr_n)
|| (load_ptr_n + load_segment_length_n) < store_ptr_n)) */
if (VEC_empty (ddr_p, may_alias_ddrs))
return;
for (i = 0; VEC_iterate (ddr_p, may_alias_ddrs, i, ddr); i++)
{
struct data_reference *dr_a, *dr_b;
gimple dr_group_first_a, dr_group_first_b;
tree addr_base_a, addr_base_b;
tree segment_length_a, segment_length_b;
gimple stmt_a, stmt_b;
dr_a = DDR_A (ddr);
stmt_a = DR_STMT (DDR_A (ddr));
dr_group_first_a = DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt_a));
if (dr_group_first_a)
{
stmt_a = dr_group_first_a;
dr_a = STMT_VINFO_DATA_REF (vinfo_for_stmt (stmt_a));
}
dr_b = DDR_B (ddr);
stmt_b = DR_STMT (DDR_B (ddr));
dr_group_first_b = DR_GROUP_FIRST_DR (vinfo_for_stmt (stmt_b));
if (dr_group_first_b)
{
stmt_b = dr_group_first_b;
dr_b = STMT_VINFO_DATA_REF (vinfo_for_stmt (stmt_b));
}
addr_base_a =
vect_create_addr_base_for_vector_ref (stmt_a, cond_expr_stmt_list,
NULL_TREE, loop);
addr_base_b =
vect_create_addr_base_for_vector_ref (stmt_b, cond_expr_stmt_list,
NULL_TREE, loop);
segment_length_a = vect_vfa_segment_size (dr_a, vect_factor);
segment_length_b = vect_vfa_segment_size (dr_b, vect_factor);
if (vect_print_dump_info (REPORT_DR_DETAILS))
{
fprintf (vect_dump,
"create runtime check for data references ");
print_generic_expr (vect_dump, DR_REF (dr_a), TDF_SLIM);
fprintf (vect_dump, " and ");
print_generic_expr (vect_dump, DR_REF (dr_b), TDF_SLIM);
}
part_cond_expr =
fold_build2 (TRUTH_OR_EXPR, boolean_type_node,
fold_build2 (LT_EXPR, boolean_type_node,
fold_build2 (POINTER_PLUS_EXPR, TREE_TYPE (addr_base_a),
addr_base_a,
segment_length_a),
addr_base_b),
fold_build2 (LT_EXPR, boolean_type_node,
fold_build2 (POINTER_PLUS_EXPR, TREE_TYPE (addr_base_b),
addr_base_b,
segment_length_b),
addr_base_a));
if (*cond_expr)
*cond_expr = fold_build2 (TRUTH_AND_EXPR, boolean_type_node,
*cond_expr, part_cond_expr);
else
*cond_expr = part_cond_expr;
}
if (vect_print_dump_info (REPORT_VECTORIZED_LOCATIONS))
fprintf (vect_dump, "created %u versioning for alias checks.\n",
VEC_length (ddr_p, may_alias_ddrs));
}
/* Function vect_loop_versioning.
If the loop has data references that may or may not be aligned or/and
has data reference relations whose independence was not proven then
two versions of the loop need to be generated, one which is vectorized
and one which isn't. A test is then generated to control which of the
loops is executed. The test checks for the alignment of all of the
data references that may or may not be aligned. An additional
sequence of runtime tests is generated for each pairs of DDRs whose
independence was not proven. The vectorized version of loop is
executed only if both alias and alignment tests are passed.
The test generated to check which version of loop is executed
is modified to also check for profitability as indicated by the
cost model initially.
The versioning precondition(s) are placed in *COND_EXPR and
*COND_EXPR_STMT_LIST. If DO_VERSIONING is true versioning is
also performed, otherwise only the conditions are generated. */
void
vect_loop_versioning (loop_vec_info loop_vinfo, bool do_versioning,
tree *cond_expr, gimple_seq *cond_expr_stmt_list)
{
struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
basic_block condition_bb;
gimple_stmt_iterator gsi, cond_exp_gsi;
basic_block merge_bb;
basic_block new_exit_bb;
edge new_exit_e, e;
gimple orig_phi, new_phi;
tree arg;
unsigned prob = 4 * REG_BR_PROB_BASE / 5;
gimple_seq gimplify_stmt_list = NULL;
tree scalar_loop_iters = LOOP_VINFO_NITERS (loop_vinfo);
int min_profitable_iters = 0;
unsigned int th;
/* Get profitability threshold for vectorized loop. */
min_profitable_iters = LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo);
th = conservative_cost_threshold (loop_vinfo,
min_profitable_iters);
*cond_expr =
fold_build2 (GT_EXPR, boolean_type_node, scalar_loop_iters,
build_int_cst (TREE_TYPE (scalar_loop_iters), th));
*cond_expr = force_gimple_operand (*cond_expr, cond_expr_stmt_list,
false, NULL_TREE);
if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo))
vect_create_cond_for_align_checks (loop_vinfo, cond_expr,
cond_expr_stmt_list);
if (LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo))
vect_create_cond_for_alias_checks (loop_vinfo, cond_expr,
cond_expr_stmt_list);
*cond_expr =
fold_build2 (NE_EXPR, boolean_type_node, *cond_expr, integer_zero_node);
*cond_expr =
force_gimple_operand (*cond_expr, &gimplify_stmt_list, true, NULL_TREE);
gimple_seq_add_seq (cond_expr_stmt_list, gimplify_stmt_list);
/* If we only needed the extra conditions and a new loop copy
bail out here. */
if (!do_versioning)
return;
initialize_original_copy_tables ();
loop_version (loop, *cond_expr, &condition_bb,
prob, prob, REG_BR_PROB_BASE - prob, true);
free_original_copy_tables();
/* Loop versioning violates an assumption we try to maintain during
vectorization - that the loop exit block has a single predecessor.
After versioning, the exit block of both loop versions is the same
basic block (i.e. it has two predecessors). Just in order to simplify
following transformations in the vectorizer, we fix this situation
here by adding a new (empty) block on the exit-edge of the loop,
with the proper loop-exit phis to maintain loop-closed-form. */
merge_bb = single_exit (loop)->dest;
gcc_assert (EDGE_COUNT (merge_bb->preds) == 2);
new_exit_bb = split_edge (single_exit (loop));
new_exit_e = single_exit (loop);
e = EDGE_SUCC (new_exit_bb, 0);
for (gsi = gsi_start_phis (merge_bb); !gsi_end_p (gsi); gsi_next (&gsi))
{
orig_phi = gsi_stmt (gsi);
new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
new_exit_bb);
arg = PHI_ARG_DEF_FROM_EDGE (orig_phi, e);
add_phi_arg (new_phi, arg, new_exit_e,
gimple_phi_arg_location_from_edge (orig_phi, e));
adjust_phi_and_debug_stmts (orig_phi, e, PHI_RESULT (new_phi));
}
/* End loop-exit-fixes after versioning. */
update_ssa (TODO_update_ssa);
if (*cond_expr_stmt_list)
{
cond_exp_gsi = gsi_last_bb (condition_bb);
gsi_insert_seq_before (&cond_exp_gsi, *cond_expr_stmt_list,
GSI_SAME_STMT);
*cond_expr_stmt_list = NULL;
}
*cond_expr = NULL_TREE;
}
Reference in New Issue View Git Blame Copy Permalink