robotux
/
rt_gccstream
1
0
Fork 0
Code Issues Pull Requests Releases Activity
rt_gccstream/gcc/ada/sysdep.c

1003 lines
27 KiB
C
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/****************************************************************************
* *
* GNAT COMPILER COMPONENTS *
* *
* S Y S D E P *
* *
* C Implementation File *
* *
* Copyright (C) 1992-2009, Free Software Foundation, Inc. *
* *
* GNAT is free software; you can redistribute it and/or modify it under *
* terms of the GNU General Public License as published by the Free Soft- *
* ware Foundation; either version 3, or (at your option) any later ver- *
* sion. GNAT is distributed in the hope that it will be useful, but WITH- *
* OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY *
* or FITNESS FOR A PARTICULAR PURPOSE. *
* *
* As a special exception under Section 7 of GPL version 3, you are granted *
* additional permissions described in the GCC Runtime Library Exception, *
* version 3.1, as published by the Free Software Foundation. *
* *
* You should have received a copy of the GNU General Public License and *
* a copy of the GCC Runtime Library Exception along with this program; *
* see the files COPYING3 and COPYING.RUNTIME respectively. If not, see *
* <http://www.gnu.org/licenses/>. *
* *
* GNAT was originally developed by the GNAT team at New York University. *
* Extensive contributions were provided by Ada Core Technologies Inc. *
* *
****************************************************************************/
/* This file contains system dependent symbols that are referenced in the
GNAT Run Time Library */
#ifdef __vxworks
#include "ioLib.h"
#if ! defined (__VXWORKSMILS__)
#include "dosFsLib.h"
#endif
#if ! defined (__RTP__) && (! defined (VTHREADS) || defined (__VXWORKSMILS__))
# include "nfsLib.h"
#endif
#include "selectLib.h"
#include "vxWorks.h"
#endif
#ifdef IN_RTS
#define POSIX
#include "tconfig.h"
#include "tsystem.h"
#include <fcntl.h>
#include <sys/stat.h>
#ifdef VMS
#include <unixio.h>
#endif
#else
#include "config.h"
#include "system.h"
#endif
#include <time.h>
#include <errno.h>
#if defined (sun) && defined (__SVR4) && !defined (__vxworks)
/* The declaration is present in <time.h> but conditionalized
on a couple of macros we don't define. */
extern struct tm *localtime_r(const time_t *, struct tm *);
#endif
#include "adaint.h"
/*
mode_read_text
open text file for reading
rt for DOS and Windows NT, r for Unix
mode_write_text
truncate to zero length or create text file for writing
wt for DOS and Windows NT, w for Unix
mode_append_text
append; open or create text file for writing at end-of-file
at for DOS and Windows NT, a for Unix
mode_read_binary
open binary file for reading
rb for DOS and Windows NT, r for Unix
mode_write_binary
truncate to zero length or create binary file for writing
wb for DOS and Windows NT, w for Unix
mode_append_binary
append; open or create binary file for writing at end-of-file
ab for DOS and Windows NT, a for Unix
mode_read_text_plus
open text file for update (reading and writing)
r+t for DOS and Windows NT, r+ for Unix
mode_write_text_plus
truncate to zero length or create text file for update
w+t for DOS and Windows NT, w+ for Unix
mode_append_text_plus
append; open or create text file for update, writing at end-of-file
a+t for DOS and Windows NT, a+ for Unix
mode_read_binary_plus
open binary file for update (reading and writing)
r+b for DOS and Windows NT, r+ for Unix
mode_write_binary_plus
truncate to zero length or create binary file for update
w+b for DOS and Windows NT, w+ for Unix
mode_append_binary_plus
append; open or create binary file for update, writing at end-of-file
a+b for DOS and Windows NT, a+ for Unix
Notes:
(1) Opening a file with read mode fails if the file does not exist or
cannot be read.
(2) Opening a file with append mode causes all subsequent writes to the
file to be forced to the then current end-of-file, regardless of
intervening calls to the fseek function.
(3) When a file is opened with update mode, both input and output may be
performed on the associated stream. However, output may not be directly
followed by input without an intervening call to the fflush function or
to a file positioning function (fseek, fsetpos, or rewind), and input
may not be directly followed by output without an intervening call to a
file positioning function, unless the input operation encounters
end-of-file.
The other target dependent declarations here are for the two functions
__gnat_set_binary_mode and __gnat_set_text_mode:
void __gnat_set_binary_mode (int handle);
void __gnat_set_text_mode (int handle);
These functions have no effect in Unix (or similar systems where there is
no distinction between binary and text files), but in DOS (and similar
systems where text mode does CR/LF translation), these functions allow
the mode of the stream with the given handle (fileno can be used to get
the handle of a stream) to be changed dynamically. The returned result
is 0 if no error occurs and -1 if an error occurs.
Finally there is a boolean (character) variable
char __gnat_text_translation_required;
which is zero (false) in Unix mode, and one (true) in DOS mode, with a
true value indicating that text translation is required on text files
and that fopen supports the trailing t and b modifiers.
*/
#if defined(WINNT) || defined (MSDOS) || defined (__EMX__)
static const char *mode_read_text = "rt";
static const char *mode_write_text = "wt";
static const char *mode_append_text = "at";
static const char *mode_read_binary = "rb";
static const char *mode_write_binary = "wb";
static const char *mode_append_binary = "ab";
static const char *mode_read_text_plus = "r+t";
static const char *mode_write_text_plus = "w+t";
static const char *mode_append_text_plus = "a+t";
static const char *mode_read_binary_plus = "r+b";
static const char *mode_write_binary_plus = "w+b";
static const char *mode_append_binary_plus = "a+b";
const char __gnat_text_translation_required = 1;
void
__gnat_set_binary_mode (int handle)
{
_setmode (handle, O_BINARY);
}
void
__gnat_set_text_mode (int handle)
{
_setmode (handle, O_TEXT);
}
#ifdef __MINGW32__
#include <windows.h>
/* Return the name of the tty. Under windows there is no name for
the tty, so this function, if connected to a tty, returns the generic name
"console". */
char *
__gnat_ttyname (int filedes)
{
if (isatty (filedes))
return "console";
else
return NULL;
}
/* This function is needed to fix a bug under Win95/98. Under these platforms
doing :
ch1 = getch();
ch2 = fgetc (stdin);
will put the same character into ch1 and ch2. It seem that the character
read by getch() is not correctly removed from the buffer. Even a
fflush(stdin) does not fix the bug. This bug does not appear under Window
NT. So we have two version of this routine below one for 95/98 and one for
NT/2000 version of Windows. There is also a special routine (winflushinit)
that will be called only the first time to check which version of Windows
we are running running on to set the right routine to use.
This problem occurs when using Text_IO.Get_Line after Text_IO.Get_Immediate
for example.
Calling FlushConsoleInputBuffer just after getch() fix the bug under
95/98. */
#ifdef RTX
static void winflush_nt (void);
/* winflush_function will do nothing since we only have problems with Windows
95/98 which are not supported by RTX. */
static void (*winflush_function) (void) = winflush_nt;
static void
winflush_nt (void)
{
/* Does nothing as there is no problem under NT. */
}
#else
static void winflush_init (void);
static void winflush_95 (void);
static void winflush_nt (void);
int __gnat_is_windows_xp (void);
/* winflusfunction is set first to the winflushinit function which will check
the OS version 95/98 or NT/2000 */
static void (*winflush_function) (void) = winflush_init;
/* This function does the runtime check of the OS version and then sets
winflush_function to the appropriate function and then call it. */
static void
winflush_init (void)
{
DWORD dwVersion = GetVersion();
if (dwVersion < 0x80000000) /* Windows NT/2000 */
winflush_function = winflush_nt;
else /* Windows 95/98 */
winflush_function = winflush_95;
(*winflush_function)(); /* Perform the 'flush' */
}
static void
winflush_95 (void)
{
FlushConsoleInputBuffer (GetStdHandle (STD_INPUT_HANDLE));
}
static void
winflush_nt (void)
{
/* Does nothing as there is no problem under NT. */
}
int
__gnat_is_windows_xp (void)
{
static int is_win_xp=0, is_win_xp_checked=0;
if (!is_win_xp_checked)
{
OSVERSIONINFO version;
is_win_xp_checked = 1;
memset (&version, 0, sizeof (version));
version.dwOSVersionInfoSize = sizeof (version);
is_win_xp = GetVersionEx (&version)
&& version.dwPlatformId == VER_PLATFORM_WIN32_NT
&& (version.dwMajorVersion > 5
|| (version.dwMajorVersion == 5 && version.dwMinorVersion >= 1));
}
return is_win_xp;
}
#endif
#endif
#else
static const char *mode_read_text = "r";
static const char *mode_write_text = "w";
static const char *mode_append_text = "a";
static const char *mode_read_binary = "r";
static const char *mode_write_binary = "w";
static const char *mode_append_binary = "a";
static const char *mode_read_text_plus = "r+";
static const char *mode_write_text_plus = "w+";
static const char *mode_append_text_plus = "a+";
static const char *mode_read_binary_plus = "r+";
static const char *mode_write_binary_plus = "w+";
static const char *mode_append_binary_plus = "a+";
const char __gnat_text_translation_required = 0;
/* These functions do nothing in non-DOS systems. */
void
__gnat_set_binary_mode (int handle ATTRIBUTE_UNUSED)
{
}
void
__gnat_set_text_mode (int handle ATTRIBUTE_UNUSED)
{
}
char *
__gnat_ttyname (int filedes)
{
#if defined (__vxworks) || defined (__nucleus)
return "";
#else
extern char *ttyname (int);
return ttyname (filedes);
#endif /* defined (__vxworks) || defined (__nucleus) */
}
#endif
#if defined (linux) || defined (sun) || defined (sgi) || defined (__EMX__) \
|| (defined (__osf__) && ! defined (__alpha_vxworks)) || defined (WINNT) \
|| defined (__MACHTEN__) || defined (__hpux__) || defined (_AIX) \
|| (defined (__svr4__) && defined (i386)) || defined (__Lynx__) \
|| defined (__CYGWIN__) || defined (__FreeBSD__) || defined (__OpenBSD__) \
|| defined (__GLIBC__) || defined (__APPLE__)
#ifdef __MINGW32__
#if OLD_MINGW
#include <termios.h>
#else
#include <conio.h> /* for getch(), kbhit() */
#endif
#else
#include <termios.h>
#endif
#else
#if defined (VMS)
extern char *decc$ga_stdscr;
static int initted = 0;
#endif
#endif
/* Implements the common processing for getc_immediate and
getc_immediate_nowait. */
extern void getc_immediate (FILE *, int *, int *);
extern void getc_immediate_nowait (FILE *, int *, int *, int *);
extern void getc_immediate_common (FILE *, int *, int *, int *, int);
/* Called by Get_Immediate (Foo); */
void
getc_immediate (FILE *stream, int *ch, int *end_of_file)
{
int avail;
getc_immediate_common (stream, ch, end_of_file, &avail, 1);
}
/* Called by Get_Immediate (Foo, Available); */
void
getc_immediate_nowait (FILE *stream, int *ch, int *end_of_file, int *avail)
{
getc_immediate_common (stream, ch, end_of_file, avail, 0);
}
/* Called by getc_immediate () and getc_immediate_nowait () */
void
getc_immediate_common (FILE *stream,
int *ch,
int *end_of_file,
int *avail,
int waiting)
{
#if defined (linux) || defined (sun) || defined (sgi) || defined (__EMX__) \
|| (defined (__osf__) && ! defined (__alpha_vxworks)) \
|| defined (__CYGWIN32__) || defined (__MACHTEN__) || defined (__hpux__) \
|| defined (_AIX) || (defined (__svr4__) && defined (i386)) \
|| defined (__Lynx__) || defined (__FreeBSD__) || defined (__OpenBSD__) \
|| defined (__GLIBC__) || defined (__APPLE__)
char c;
int nread;
int good_one = 0;
int eof_ch = 4; /* Ctrl-D */
int fd = fileno (stream);
struct termios otermios_rec, termios_rec;
if (isatty (fd))
{
tcgetattr (fd, &termios_rec);
memcpy (&otermios_rec, &termios_rec, sizeof (struct termios));
/* Set RAW mode, with no echo */
termios_rec.c_lflag = termios_rec.c_lflag & ~ICANON & ~ECHO;
#if defined(linux) || defined (sun) || defined (sgi) || defined (__EMX__) \
|| defined (__osf__) || defined (__MACHTEN__) || defined (__hpux__) \
|| defined (_AIX) || (defined (__svr4__) && defined (i386)) \
|| defined (__Lynx__) || defined (__FreeBSD__) || defined (__OpenBSD__) \
|| defined (__GLIBC__) || defined (__APPLE__)
eof_ch = termios_rec.c_cc[VEOF];
/* If waiting (i.e. Get_Immediate (Char)), set MIN = 1 and wait for
a character forever. This doesn't seem to effect Ctrl-Z or
Ctrl-C processing except on OS/2 where Ctrl-C won't work right
unless we do a read loop. Luckily we can delay a bit between
iterations. If not waiting (i.e. Get_Immediate (Char, Available)),
don't wait for anything but timeout immediately. */
#ifdef __EMX__
termios_rec.c_cc[VMIN] = 0;
termios_rec.c_cc[VTIME] = waiting;
#else
termios_rec.c_cc[VMIN] = waiting;
termios_rec.c_cc[VTIME] = 0;
#endif
#endif
tcsetattr (fd, TCSANOW, &termios_rec);
while (! good_one)
{
/* Read is used here instead of fread, because fread doesn't
work on Solaris5 and Sunos4 in this situation. Maybe because we
are mixing calls that use file descriptors and streams. */
nread = read (fd, &c, 1);
if (nread > 0)
{
/* On Unix terminals, Ctrl-D (EOT) is an End of File. */
if (c == eof_ch)
{
*avail = 0;
*end_of_file = 1;
good_one = 1;
}
/* Everything else is ok */
else if (c != eof_ch)
{
*avail = 1;
*end_of_file = 0;
good_one = 1;
}
}
else if (! waiting)
{
*avail = 0;
*end_of_file = 0;
good_one = 1;
}
else
good_one = 0;
}
tcsetattr (fd, TCSANOW, &otermios_rec);
*ch = c;
}
else
#elif defined (VMS)
int fd = fileno (stream);
if (isatty (fd))
{
if (initted == 0)
{
decc$bsd_initscr ();
initted = 1;
}
decc$bsd_cbreak ();
*ch = decc$bsd_wgetch (decc$ga_stdscr);
if (*ch == 4)
*end_of_file = 1;
else
*end_of_file = 0;
*avail = 1;
decc$bsd_nocbreak ();
}
else
#elif defined (__MINGW32__)
int fd = fileno (stream);
int char_waiting;
int eot_ch = 4; /* Ctrl-D */
if (isatty (fd))
{
if (waiting)
{
*ch = getch ();
(*winflush_function) ();
if (*ch == eot_ch)
*end_of_file = 1;
else
*end_of_file = 0;
*avail = 1;
}
else /* ! waiting */
{
char_waiting = kbhit();
if (char_waiting == 1)
{
*avail = 1;
*ch = getch ();
(*winflush_function) ();
if (*ch == eot_ch)
*end_of_file = 1;
else
*end_of_file = 0;
}
else
{
*avail = 0;
*end_of_file = 0;
}
}
}
else
#elif defined (__vxworks)
/* Bit masks of file descriptors to read from. */
struct fd_set readFds;
/* Timeout before select returns if nothing can be read. */
struct timeval timeOut;
char c;
int fd = fileno (stream);
int nread;
int option;
int readable;
int status;
int width;
if (isatty (fd))
{
/* If we do not want to wait, we have to set up fd in RAW mode. This
should be done outside this function as setting fd in RAW mode under
vxWorks flushes the buffer of fd. If the RAW mode was set here, the
buffer would be empty and we would always return that no character
is available */
if (! waiting)
{
/* Initialization of timeOut for its use with select. */
timeOut.tv_sec = 0;
timeOut.tv_usec = 0;
/* Initialization of readFds for its use with select;
FD is the only file descriptor to be monitored */
FD_ZERO (&readFds);
FD_SET (fd, &readFds);
width = 2;
/* We do all this processing to emulate a non blocking read. */
readable = select (width, &readFds, NULL, NULL, &timeOut);
if (readable == ERROR)
*avail = -1, *end_of_file = -1;
/* No character available in input. */
else if (readable == 0)
*avail = 0, *end_of_file = 0;
else
{
nread = read (fd, &c, 1);
if (nread > 0)
*avail = 1, *end_of_file = 0;
/* End Of File. */
else if (nread == 0)
*avail = 0, *end_of_file = 1;
/* Error. */
else
*avail = -1, *end_of_file = -1;
}
}
/* We have to wait until we get a character */
else
{
*avail = -1;
*end_of_file = -1;
/* Save the current mode of FD. */
option = ioctl (fd, FIOGETOPTIONS, 0);
/* Set FD in RAW mode. */
status = ioctl (fd, FIOSETOPTIONS, OPT_RAW);
if (status != -1)
{
nread = read (fd, &c, 1);
if (nread > 0)
*avail = 1, *end_of_file = 0;
/* End of file. */
else if (nread == 0)
*avail = 0, *end_of_file = 1;
/* Else there is an ERROR. */
}
/* Revert FD to its previous mode. */
status = ioctl (fd, FIOSETOPTIONS, option);
}
*ch = c;
}
else
#endif
{
/* If we're not on a terminal, then we don't need any fancy processing.
Also this is the only thing that's left if we're not on one of the
supported systems; which means that for non supported systems,
get_immediate may wait for a carriage return on terminals. */
*ch = fgetc (stream);
if (feof (stream))
{
*end_of_file = 1;
*avail = 0;
}
else
{
*end_of_file = 0;
*avail = 1;
}
}
}
/* The following definitions are provided in NT to support Windows based
Ada programs. */
#ifdef WINNT
#include <windows.h>
/* Provide functions to echo the values passed to WinMain (windows bindings
will want to import these). We use the same names as the routines used
by AdaMagic for compatibility. */
char *rts_get_hInstance (void);
char *rts_get_hPrevInstance (void);
char *rts_get_lpCommandLine (void);
int rts_get_nShowCmd (void);
char *
rts_get_hInstance (void)
{
return (char *)GetModuleHandleA (0);
}
char *
rts_get_hPrevInstance (void)
{
return 0;
}
char *
rts_get_lpCommandLine (void)
{
return GetCommandLineA ();
}
int
rts_get_nShowCmd (void)
{
return 1;
}
#endif /* WINNT */
#ifdef VMS
/* This gets around a problem with using the old threads library on VMS 7.0. */
extern long get_gmtoff (void);
long
get_gmtoff (void)
{
time_t t;
struct tm *ts;
t = time ((time_t) 0);
ts = localtime (&t);
return ts->tm_gmtoff;
}
#endif
/* This value is returned as the time zone offset when a valid value
cannot be determined. It is simply a bizarre value that will never
occur. It is 3 days plus 73 seconds (offset is in seconds). */
long __gnat_invalid_tzoff = 259273;
/* Definition of __gnat_localtime_r used by a-calend.adb */
#if defined (__EMX__) || defined (__MINGW32__)
#ifdef CERT
/* For the Cert run times on native Windows we use dummy functions
for locking and unlocking tasks since we do not support multiple
threads on this configuration (Cert run time on native Windows). */
void dummy (void) {}
void (*Lock_Task) () = &dummy;
void (*Unlock_Task) () = &dummy;
#else
#define Lock_Task system__soft_links__lock_task
extern void (*Lock_Task) (void);
#define Unlock_Task system__soft_links__unlock_task
extern void (*Unlock_Task) (void);
#endif
/* Reentrant localtime for Windows and OS/2. */
extern void
__gnat_localtime_tzoff (const time_t *, long *);
static const unsigned long long w32_epoch_offset = 11644473600ULL;
void
__gnat_localtime_tzoff (const time_t *timer, long *off)
{
union
{
FILETIME ft_time;
unsigned long long ull_time;
} utc_time, local_time;
SYSTEMTIME utc_sys_time, local_sys_time;
TIME_ZONE_INFORMATION tzi;
BOOL status = 1;
DWORD tzi_status;
(*Lock_Task) ();
#ifdef RTX
tzi_status = GetTimeZoneInformation (&tzi);
*off = tzi.Bias;
if (tzi_status == TIME_ZONE_ID_STANDARD)
/* The system is operating in the range covered by the StandardDate
member. */
*off = *off + tzi.StandardBias;
else if (tzi_status == TIME_ZONE_ID_DAYLIGHT)
/* The system is operating in the range covered by the DaylightDate
member. */
*off = *off + tzi.DaylightBias;
*off = *off * -60;
#else
/* First convert unix time_t structure to windows FILETIME format. */
utc_time.ull_time = ((unsigned long long) *timer + w32_epoch_offset)
* 10000000ULL;
tzi_status = GetTimeZoneInformation (&tzi);
/* If GetTimeZoneInformation does not return a value between 0 and 2 then
it means that we were not able to retrieve timezone informations.
Note that we cannot use here FileTimeToLocalFileTime as Windows will use
in always in this case the current timezone setting. As suggested on
MSDN we use the following three system calls to get the right information.
Note also that starting with Windows Vista new functions are provided to
get timezone settings that depend on the year. We cannot use them as we
still support Windows XP and Windows 2003. */
status = (tzi_status >= 0 && tzi_status <= 2)
&& FileTimeToSystemTime (&utc_time.ft_time, &utc_sys_time)
&& SystemTimeToTzSpecificLocalTime (&tzi, &utc_sys_time, &local_sys_time)
&& SystemTimeToFileTime (&local_sys_time, &local_time.ft_time);
if (!status)
/* An error occurs so return invalid_tzoff. */
*off = __gnat_invalid_tzoff;
else
if (local_time.ull_time > utc_time.ull_time)
*off = (long) ((local_time.ull_time - utc_time.ull_time) / 10000000ULL);
else
*off = - (long) ((utc_time.ull_time - local_time.ull_time) / 10000000ULL);
#endif
(*Unlock_Task) ();
}
#else
/* On Lynx, all time values are treated in GMT */
#if defined (__Lynx__)
/* As of LynxOS 3.1.0a patch level 040, LynuxWorks changes the
prototype to the C library function localtime_r from the POSIX.4
Draft 9 to the POSIX 1.c version. Before this change the following
spec is required. Only use when ___THREADS_POSIX4ad4__ is defined,
the Lynx convention when building against the legacy API. */
extern void
__gnat_localtime_tzoff (const time_t *, long *);
void
__gnat_localtime_tzoff (const time_t *timer, long *off)
{
*off = 0;
}
#else
/* VMS does not need __gnat_locatime_tzoff */
#if defined (VMS)
/* Other targets except Lynx, VMS and Windows provide a standard locatime_r */
#else
#define Lock_Task system__soft_links__lock_task
extern void (*Lock_Task) (void);
#define Unlock_Task system__soft_links__unlock_task
extern void (*Unlock_Task) (void);
extern void
__gnat_localtime_tzoff (const time_t *, long *);
void
__gnat_localtime_tzoff (const time_t *timer, long *off)
{
struct tm tp;
/* AIX, HPUX, SGI Irix, Sun Solaris */
#if defined (_AIX) || defined (__hpux__) || defined (sgi) || defined (sun)
{
(*Lock_Task) ();
localtime_r (timer, &tp);
*off = (long) -timezone;
(*Unlock_Task) ();
/* Correct the offset if Daylight Saving Time is in effect */
if (tp.tm_isdst > 0)
*off = *off + 3600;
}
/* VxWorks */
#elif defined (__vxworks)
#include <stdlib.h>
{
(*Lock_Task) ();
localtime_r (timer, &tp);
/* Try to read the environment variable TIMEZONE. The variable may not have
been initialize, in that case return an offset of zero (0) for UTC. */
char *tz_str = getenv ("TIMEZONE");
if ((tz_str == NULL) || (*tz_str == '\0'))
*off = 0;
else
{
char *tz_start, *tz_end;
/* The format of the data contained in TIMEZONE is N::U:S:E where N is the
name of the time zone, U are the minutes difference from UTC, S is the
start of DST in mmddhh and E is the end of DST in mmddhh. Extracting
the value of U involves setting two pointers, one at the beginning and
one at the end of the value. The end pointer is then set to null in
order to delimit a string slice for atol to process. */
tz_start = index (tz_str, ':') + 2;
tz_end = index (tz_start, ':');
tz_end = '\0';
/* The Ada layer expects an offset in seconds. Note that we must reverse
the sign of the result since west is positive and east is negative on
VxWorks targets. */
*off = -atol (tz_start) * 60;
/* Correct the offset if Daylight Saving Time is in effect */
if (tp.tm_isdst > 0)
*off = *off + 3600;
}
(*Unlock_Task) ();
}
/* Darwin, Free BSD, Linux, Tru64, where component tm_gmtoff is present in
struct tm */
#elif defined (__APPLE__) || defined (__FreeBSD__) || defined (linux) ||\
(defined (__alpha__) && defined (__osf__)) || defined (__GLIBC__)
{
localtime_r (timer, &tp);
*off = tp.tm_gmtoff;
}
/* Default: treat all time values in GMT */
#else
*off = 0;
#endif
}
#endif
#endif
#endif
#ifdef __vxworks
#include <taskLib.h>
/* __gnat_get_task_options is used by s-taprop.adb only for VxWorks. This
function returns the options to be set when creating a new task. It fetches
the options assigned to the current task (parent), so offering some user
level control over the options for a task hierarchy. It forces VX_FP_TASK
because it is almost always required. On processors with the SPE
category, VX_SPE_TASK is needed to enable the SPE. */
extern int __gnat_get_task_options (void);
int
__gnat_get_task_options (void)
{
int options;
/* Get the options for the task creator */
taskOptionsGet (taskIdSelf (), &options);
/* Force VX_FP_TASK because it is almost always required */
options |= VX_FP_TASK;
#if defined (__SPE__)
options |= VX_SPE_TASK;
#endif
/* Mask those bits that are not under user control */
#ifdef VX_USR_TASK_OPTIONS
return options & VX_USR_TASK_OPTIONS;
#else
return options;
#endif
}
#endif
int
__gnat_is_file_not_found_error (int errno_val) {
switch (errno_val) {
case ENOENT:
#ifdef __vxworks
/* In the case of VxWorks, we also have to take into account various
* filesystem-specific variants of this error.
*/
#if ! defined (__VXWORKSMILS__)
case S_dosFsLib_FILE_NOT_FOUND:
#endif
#if ! defined (__RTP__) && (! defined (VTHREADS) || defined (__VXWORKSMILS__))
case S_nfsLib_NFSERR_NOENT:
#endif
#endif
return 1;
default:
return 0;
}
}
Reference in New Issue View Git Blame Copy Permalink