91 lines
2.6 KiB
Plaintext
91 lines
2.6 KiB
Plaintext
This test was conducted in several phases, detailed after. Each file
|
||
correspond to a phase, and is named accordingly.
|
||
|
||
The humidity is measured at the coordinates (0.25;4.75), so that an
|
||
operator in the corridor behind the windows can read the measurements.
|
||
The temperature is between 22°C et 22.5°C.
|
||
|
||
* Phase 1: doors closed, humidity stabilised
|
||
Description: The two doors of the room are closed, the humidity is
|
||
stabilised.
|
||
Hour: 10:42 to 10:56
|
||
Humidity: 47%
|
||
|
||
* Phase 2: doors open, hot water basins near the doors
|
||
Description: The two doors of the room are open, and a basin containing
|
||
boiled water is put in front of each of the doors, in order to increase
|
||
the humidity slightly and slowly.
|
||
Hour: 10:57 to 11:07
|
||
Humidity measurements:
|
||
- 10:57 to 11:00: 48%
|
||
- 11:01: 49%
|
||
- 11:02: 50%
|
||
- 11:03: 51%
|
||
- 11:04 to 11:07: 52%
|
||
|
||
* Phase 3: doors closed, water boiling
|
||
Description: The two doors are closed, three basins of hot water are put
|
||
on the floor at the coordinates (2;2), (2;9) and (4;6). Two boilers
|
||
containing respectively 1.7L and 1.8L of water are on the floor,
|
||
respectively at coordinates (2;5) and (2;6), and boiling continuously
|
||
during the test.
|
||
Humidity measurements:
|
||
- 11:12 to 11:13: 52%
|
||
- 11:14: 53%
|
||
- 11:15: 54% to 55%
|
||
- 11:16: 56% to 59%
|
||
- 11:17: 60% to 62%
|
||
- 11:18: 63%
|
||
- 11:19: 64% to 65%
|
||
- 11:20: 66% to 67%
|
||
- 11:21: 68% to 69%
|
||
- 11:22: 70% to 71%
|
||
- 11:23: 72%
|
||
- 11:24: 73%
|
||
- 11:25: 74% to 75%
|
||
- 11:26: 76%
|
||
- 11:27: 77%
|
||
- 11:29: 78%
|
||
- 11:30: 79%
|
||
- 11:31: 80%
|
||
- 11:32 to 11:33: 81%
|
||
|
||
* Phase 4
|
||
Description: This is the same as phase 3, after reloading the boilers so
|
||
that they both contain 1.5L of water. This is mostly the same as the
|
||
previous phase, since the dehumidifier used to measure the humidity
|
||
started working. The file corresponding to this phase is kept, but one
|
||
should prefer using phases 3 and 5 instead.
|
||
Hour: 11:38 to 11:57
|
||
Humidity measurements:
|
||
- 11:38: 79% to 78%
|
||
- 11:39: 77%
|
||
- 11:40: 76% to 75%
|
||
- 11:41: 76%
|
||
- 11:42: 77%
|
||
- 11:43: 78%
|
||
- 11:44 to 11:46: 79%
|
||
- 11:47 to 11:49: 80%
|
||
- 11:50 to 11:51: 81%
|
||
- 11:52 to 11:55: 82%
|
||
- 11:56 to 11:57: 83%
|
||
|
||
* Phase 5
|
||
Description: The two boilers are refilled with water at their maximal
|
||
capacity. The measurements were stopped after 85% of humidity were
|
||
reached and the dehumidifier started working.
|
||
Hour: 12:17 to 12:24
|
||
Humidity measurements:
|
||
- 12:17: 82%
|
||
- 12:18: 83%
|
||
- 12:19: 84% 83%
|
||
- 12:20 to 12:23: 84%
|
||
- 12:24: 85%
|
||
|
||
* Phase 6
|
||
Description: This is the continuation of the phase 5, after having
|
||
stopped the dehumidifier. It started working again after about one
|
||
minute and a half, and the measurements were stopped.
|
||
Hour: 12:27 to 12:28
|
||
Humidity: 86%
|