This test was conducted in several phases, detailed after. Each file
correspond to a phase, and is named accordingly.

The file _phase3_58 contains the requests from approximately 11:15 to
11:17, i.e. that are around 58% humidity.

The humidity is measured at the coordinates (0.25;4.75), so that an
operator in the corridor behind the windows can read the measurements.
The temperature is between 22°C et 22.5°C.

* Phase 1: doors closed, humidity stabilised
Description: The two doors of the room are closed, the humidity is
stabilised.
Hour: 10:42 to 10:56
Humidity: 47%

* Phase 2: doors open, hot water basins near the doors
Description: The two doors of the room are open, and a basin containing
boiled water is put in front of each of the doors, in order to increase
the humidity slightly and slowly.
Hour: 10:57 to 11:07
Humidity measurements:
- 10:57 to 11:00: 48%
- 11:01: 49%
- 11:02: 50%
- 11:03: 51%
- 11:04 to 11:07: 52%

* Phase 3: doors closed, water boiling
Description: The two doors are closed, three basins of hot water are put
on the floor at the coordinates (2;2), (2;9) and (4;6). Two boilers
containing respectively 1.7L and 1.8L of water are on the floor,
respectively at coordinates (2;5) and (2;6), and boiling continuously
during the test.
Humidity measurements:
- 11:12 to 11:13: 52%
- 11:14: 53%
- 11:15: 54% to 55%
- 11:16: 56% to 59%
- 11:17: 60% to 62%
- 11:18: 63%
- 11:19: 64% to 65%
- 11:20: 66% to 67%
- 11:21: 68% to 69%
- 11:22: 70% to 71%
- 11:23: 72%
- 11:24: 73%
- 11:25: 74% to 75%
- 11:26: 76%
- 11:27: 77%
- 11:29: 78%
- 11:30: 79%
- 11:31: 80%
- 11:32 to 11:33: 81%

* Phase 4
Description: This is the same as phase 3, after reloading the boilers so
that they both contain 1.5L of water. This is mostly the same as the
previous phase, since the dehumidifier used to measure the humidity
started working. The file corresponding to this phase is kept, but one
should prefer using phases 3 and 5 instead.
Hour: 11:38 to 11:57
Humidity measurements:
- 11:38: 79% to 78%
- 11:39: 77%
- 11:40: 76% to 75%
- 11:41: 76%
- 11:42: 77%
- 11:43: 78%
- 11:44 to 11:46: 79%
- 11:47 to 11:49: 80%
- 11:50 to 11:51: 81%
- 11:52 to 11:55: 82%
- 11:56 to 11:57: 83%

* Phase 5
Description: The two boilers are refilled with water at their maximal
capacity. The measurements were stopped after 85% of humidity were
reached and the dehumidifier started working.
Hour: 12:17 to 12:24
Humidity measurements:
- 12:17: 82%
- 12:18: 83%
- 12:19: 84% 83%
- 12:20 to 12:23: 84%
- 12:24: 85%

* Phase 6
Description: This is the continuation of the phase 5, after having
stopped the dehumidifier. It started working again after about one
minute and a half, and the measurements were stopped.
Hour: 12:27 to 12:28
Humidity: 86%