config: add offices/ subdirectory

v1.3.1/owlps-config/offices/listeners-fonera.csv

@@ -0,0 +1,31 @@
+# Listeners' physical description file.
+#
+# Each line follows this format:
+#   MAC address;X;Y;Z;Channel (Hz);Antenna gain (dBi);Trx power (dBm)
+#
+# Blank lines are ignored. Commented lines must have a sharp (#) as
+# their FIRST character.
+
+# listener1 (TBF07) (0;0)
+# Base MAC: 00:18:84:D0:1C:BC
+# Room: 1100
+# Real altitude: 0.73
+00:18:84:D0:1C:BD;1.70;4.95;1;2452000000;5.0;18.0
+
+# listener3 (TBF06) (0;Y)
+# Base MAC: 00:18:84:D0:0E:98
+# Room: Meeting room
+# Real altitude: 1.06
+00:18:84:D0:0E:99;2;24.93;1;2452000000;5.0;18.0
+
+# owlps-slave1 (TBF04) (X;Y)
+# Base MAC: 00:18:84:D0:24:74
+# Room: Stock
+# Real altitude: 0.81
+00:18:84:D0:24:75;8.43;20.88;1;2452000000;5.0;18.0
+
+# listener4 (TBF10 phidget) (X;0)
+# Base MAC: 00:18:84:D0:2A:E8
+# Room: Toilets
+# Real altitude: 0.85
+00:18:84:D0:2A:E9;8.70;2.30;1;2452000000;5.0;18.0

v1.3.1/owlps-config/offices/mobiles.csv

@@ -0,0 +1,31 @@
+# Mobiles' physical description file.
+#
+# Each line follows this format:
+#   MAC address;Antenna gain (dBi);Trx power (dBm)
+#
+# Blank lines are ignored. Commented lines must have a sharp (#) as
+# their FIRST character.
+
+# Fonera 2.0 (owlps-client-fon, TBF08)
+# Base MAC: 00:18:84:D0:2A:0C
+00:18:84:D0:2A:0D;5.0;18
+
+
+# Declaration of the listeners: this is needed to take into account the
+# autocalibration requests when positioning.accept-new-mobiles = false.
+
+# listener1 (TBF07) (0;0)
+# Base MAC: 00:18:84:D0:1C:BC
+00:18:84:D0:1C:BD;5.0;18.0
+
+# listener3 (TBF06) (0;Y)
+# Base MAC: 00:18:84:D0:0E:98
+00:18:84:D0:0E:99;5.0;18.0
+
+# owlps-slave1 (TBF04) (X;Y)
+# Base MAC: 00:18:84:D0:24:74
+00:18:84:D0:24:75;5.0;18.0
+
+# listener4 (TBF10 phidget) (X;0)
+# Base MAC: 00:18:84:D0:2A:E8
+00:18:84:D0:2A:E9;5.0;18.0

v1.3.1/owlps-config/offices/topology.csv

@@ -0,0 +1,21 @@
+# Description of deployment area topology (rooms).
+# Each line defines an area, using the following format:
+#   Building name;Room name;X1;Y1;Z1;X2;Y2;Z2
+
+### LIFC, second floor ###
+# Note: the Z coordinates is relative to this floor, i.e. 0 corresponds
+# to this floor's floor.
+
+Numerica;1100;1.00;7.28;0.00;6.05;3.70;3.00
+Numerica;0190;1.00;10.88;0.00;6.05;7.28;3.00
+Numerica;0180;1.00;14.48;0.00;6.05;10.88;3.00
+Numerica;1070;1.00;18.12;0.00;6.05;14.48;3.00
+Numerica;1060;1.00;25.32;0.00;6.05;18.12;3.00
+Numerica;1050;1.00;31.40;0.00;6.05;25.32;3.00
+Numerica;WC N1;8.20;9.00;0.00;10.00;0.50;3.00
+Numerica;1105;8.20;10.88;0.00;10.00;9.00;3.00
+Numerica;1095;8.20;29.30;0.00;10.00;24.80;3.00
+Numerica;Palier N1;5.00;3.70;0.00;8.20;0.50;3.00
+Numerica;Couloir N1 A;6.05;29.50;0.00;8.20;3.70;3.00
+Numerica;Couloir N1 B;8.20;16.50;0.00;10.00;10.88;3.00
+Numerica;Couloir N1 C;8.20;24.80;0.00;10.00;22.60;3.00

v1.3.1/owlps-config/offices/waypoints.csv

@@ -0,0 +1,57 @@
+# Description of deployment area topology (waypoints).
+#
+# This file lists the waypoints linking the areas defined in the
+# topology file (doors, etc.).
+#
+# Each line defines a waypoint, using the following format:
+#   X;Y;Z;Building1 name;…;BuildingN name
+# Each point must belong to at least one building.
+#
+# Note: As of OwlPS v1.3.1, this file is useless.
+
+
+### LIFC, second floor ###
+# Note: the Z coordinates is relative to this floor, i.e. 0 corresponds
+# to this floor's floor.
+
+# 1100
+6.05;6.50;0.00;Numerica
+
+# 0190
+6.05;7.50;0.00;Numerica
+
+# 0180
+6.05;13.50;0.00;Numerica
+
+# 0190 / 0180
+3.00;10.88;0.00;Numerica
+
+# 1070
+6.05;14.50;0.00;Numerica
+
+# 1060
+6.05;21.00;0.00;Numerica
+
+# 1050
+6.05;27.75;0.00;Numerica
+
+# WC N1
+8.20;5.00;0.00;Numerica
+
+# 1105
+8.20;9.50;0.00;Numerica
+
+# 1095
+8.20;26.00;0.00;Numerica
+
+# Couloir N1 A / B
+8.20;11.50;0.00;Numerica
+8.20;13.00;0.00;Numerica
+8.20;14.50;0.00;Numerica
+8.20;16.00;0.00;Numerica
+
+# Couloir N1 A / C
+8.20;23.70;0.00;Numerica
+
+# Palier N1
+7.50;3.70;0.00;Numerica